AE86 ACT Heavy Duty Performance Street Sprung Clutch Kit | 4A-GE (1983-87 Corolla)

ACT Heavy Duty Performance Street Sprung Clutch Kit

For 1983–1987 Toyota Corolla AE86 Trueno / Levin and 1985–1987 U.S.-Market Corolla Sport AE86 GT-S with 1.6L 4A-GE and manual transmission

Overview

The ACT Heavy Duty Performance Street Sprung Clutch Kit is a single-disc performance clutch package for 4A-GE-powered Toyota AE86 manual-transmission applications. It combines a Heavy Duty pressure plate with a full-face sprung organic street disc to increase holding capacity while retaining smooth, progressive engagement for street-driven performance cars.

The kit is rated for 210 ft-lb of engine/crank torque, approximately 45% greater torque capacity than the OE clutch. Light-to-moderate pedal effort, a sprung hub, and organic friction material make it well suited to spirited street driving, autocross, track use, and mild-to-moderate power increases where drivability remains important.

Key Features

• 210 ft-lb engine/crank torque capacity
• 45% greater torque capacity than OE
• Heavy Duty diaphragm-style pressure plate
• 200 mm / 7.9 in. full-face sprung organic clutch disc
• 21-spline, 15/16 in. input shaft configuration
• Premium organic friction material with steel-backed lining
• Light-to-moderate pedal effort with smooth, positive engagement
• Designed for street and race use

Vehicle Fitment

Toyota Sprinter Trueno / Corolla Levin

• 1983–1987 Toyota Corolla AE86 – Trueno (JDM) – 1.6L 4A-GE – Manual Transmission
• 1983–1987 Toyota Corolla AE86 – Levin (JDM) – 1.6L 4A-GE – Manual Transmission

Toyota Corolla Sport GT-S

• 1985–1987 Toyota Corolla Sport AE86 – GT-S (U.S.-Market) – 1.6L 4A-GE – Manual Transmission

Fitment Notes

• Designed for AE86 applications using the factory-style 200 mm 4A-GE clutch and flywheel configuration.
• Uses a 21-spline, 15/16 in. input shaft configuration.
• Vehicles with engine, transmission, or flywheel conversions should be matched by the installed clutch and flywheel configuration rather than chassis alone.
• Flywheel is not included. Inspect and properly resurface or replace the flywheel as needed during clutch installation.
• Allow approximately 300–500 miles of mild break-in driving before racing or aggressive use.

Product Specifications

Brand: ACT
Series: Heavy Duty / Performance Street
Product Type: Single-Disc Clutch Kit
Torque Capacity: 210 ft-lb at Engine/Crank
Torque Capacity Over OE: 45%
Clutch Disc Diameter: 200 mm / 7.9 in.
Disc Type: Full-Face Sprung Street Disc
Disc Material: Organic
Spline Count: 21
Input Shaft Diameter: 15/16 in. / 0.9375 in.
Pressure Plate Type: Heavy Duty
Product Weight: 10.3 lb
Engine: 1.6L 4A-GE
Transmission: Manual
Drivetrain: RWD
Warranty: 12 Months

What's Included

• (1) Heavy Duty pressure plate
• (1) Performance Street sprung organic clutch disc
• (1) Clutch release bearing
• (1) Pilot bearing
• (1) Clutch alignment tool