HKS vs. TOMEI Cam Gears: 4A-GE / 4A-GZE 16V Buying Guide

Choosing adjustable cam gears for an AE86, AW11 MR2 or AE92? Start with the engine and timing system, then choose the gear and quantity. Preserve Rad’s HKS and TOMEI options cover the listed 4A-GE / 4A-GZE 16-valve applications. Neither is a universal fit for every Corolla or MR2 carrying those chassis codes.

Shop HKS adjustable cam gears · Shop TOMEI adjustable cam gears

Confirm the engine before choosing a brand

For the products linked here, confirm a compatible 4A-GE or 4A-GZE 16V camshaft and timing-belt system. Factory AE86 SR5 4A-C and AE92 SR5 4A-F / 4A-FE configurations are outside these listings. A swapped car must be matched to its installed engine rather than its original chassis badge.

20-valve swap? These listings do not establish a complete 20V cam-gear setup. HKS specifically excludes the intake side of the five-valve-per-cylinder 4A-GE. Send your engine and camshaft details through Fitment Help before ordering for a conversion.

What differs between HKS and TOMEI?

Manufacturer details for the compared 4A cam gears
Detail HKS TOMEI
Adjustment design Slide-type cam pulley Slide-type cam gear
Construction A2014 duralumin; nickel-plated gear section Duralumin pulley and gear
Camshaft position Intake or exhaust on supported 16V applications Common intake/exhaust application for 4AG 4VALVE

These construction details describe the products; they do not demonstrate that either gear makes more power in your engine. Compare the current product options and pricing, then have your engine builder confirm the choice against the camshafts and timing setup.

Do you need one gear or a pair?

One gear serves one camshaft. Choose a single unit when your build calls for one adjustable gear. Choose the pair option when your compatible intake and exhaust camshafts both require adjustable gears. Both Preserve Rad listings offer single and pair configurations; check the selected option before adding to cart.

Read adjustment figures in the correct units

A camshaft-angle figure and a crankshaft-angle figure are not interchangeable. TOMEI’s manual explains that ±10 on its pulley scale corresponds to ±20 degrees of crankshaft timing change. A larger-looking number expressed in different units is not evidence of a larger adjustment range. The available range also does not tell you the correct setting for your engine.

Plan the complete purchase

Confirm the engine, valve count, installed camshafts, required gear quantity and timing-belt application. The HKS Fine Tune Timing Belt is a separate product for the specified 16V timing systems; it is not included with a cam gear.

Adjustable gears require measured valve-timing setup. TOMEI specifies competition use and professional installation; follow the applicable product instructions and camshaft maker’s specifications. Do not select a setting from a generic horsepower claim.

Browse AE86 engine parts, AW11 MR2 engine parts or AE92 engine parts for related applications.

Sources and scope

Compiled from the linked Preserve Rad listings and the HKS cam-pulley overview, HKS application table and TOMEI adjustable cam-gear manual. This is a buying comparison, not a dyno test or installation procedure. Reviewed October 27, 2026.