Prothane Polyurethane Front Sway Bar & End Link Bushing Kit | 24mm (1990-95 4Runner)

Prothane Polyurethane Front Sway Bar & End Link Bushing Kit

For 1990–1995 Toyota 4Runner 2WD & 4WD with a 24mm front sway bar

Overview

The Prothane Front Sway Bar & End Link Bushing Kit replaces worn factory rubber front stabilizer-bar mounting and end-link bushings on 1990–1995 2nd Gen Toyota 4Runner models equipped with a 24mm front sway bar.

Polyurethane provides a firmer connection between the sway bar, chassis, and end-link assemblies than aged rubber, helping reduce unwanted bushing deflection while maintaining direct-fit factory mounting locations.

Key Features

• Designed for a 24mm front sway bar
• Fits supported 2WD and 4WD 2nd Gen 4Runner applications
• Polyurethane frame and end-link bushings
• Services both driver and passenger sides
• Includes dished washers and installation grease
• Available in Black or Red

Choosing the Correct Sway Bar Diameter

Measure the installed front sway bar before ordering. This kit is sized specifically for a 24mm bar. Measure a clean, straight section of the bar with calipers, particularly on vehicles with an unknown suspension-service history.

Vehicle Fitment

Toyota 4Runner

• 1990–1995 Toyota 4Runner – 2nd Gen – 2WD – 24mm Front Sway Bar
• 1990–1995 Toyota 4Runner – 2nd Gen – 4WD – 24mm Front Sway Bar

Fitment Notes

• Front application only.
• Requires a 24mm front sway bar.
• Fits 2WD and 4WD models within the stated application.
• One kit services both driver and passenger sides.
• Replacement end-link bolts, sleeves, and lock nuts are not included with this configuration.
• Apply the supplied polyurethane grease to the sway-bar bushing contact surfaces during installation.

Product Specifications

Brand: Prothane
Product Type: Front Sway Bar & End Link Bushing Kit
Position: Front
Material: Polyurethane / Steel Hardware
Sway Bar Diameter: 24mm
Color Options: Black / Red
Drivetrain: 2WD / 4WD
Fit Type: Vehicle-Specific / Direct Fit
Installation Grease: Included

Supporting Suspension Components

For 1990–1995 Toyota 4Runner 4WD applications equipped with an 18mm rear sway bar, the Prothane 18mm Rear Sway Bar & End Link Bushing Kit | 4WD replaces the rear sway-bar frame and end-link bushings. The Prothane Polyurethane Rear Control Arm Bushing Kit replaces the rear control-arm pivot bushings on 1990–1995 4Runner 2WD and 4WD models. These components service separate rear suspension points and can complement the front sway-bar bushing service during a broader suspension refresh.

Available Configurations

Black

• 24mm front sway bar and end-link bushing kit in black polyurethane.

Red

• 24mm front sway bar and end-link bushing kit in red polyurethane.