Brembo UV Coated OE Front Brake Rotor 4WD (1986-95 4Runner)

Brembo UV Coated OE Front Brake Rotor 4WD

For 1986–1995 Toyota 4Runner 4WD

Overview

The Brembo Prime UV Coated Front Brake Rotor is an OE-equivalent replacement for 1986–1995 Toyota 4Runner 4WD front brake applications.

This listing combines the two front rotor configurations used across the model range. 1986–05/1991 models use a 289 mm vented rotor with a 20 mm new thickness, while 06/1991–1995 models use a 291 mm vented rotor with a 25 mm new thickness. Select the production range that matches the vehicle before ordering.

The 1991 model year is a front brake transition period. Owners of 1991 4Runners should verify the vehicle's production date and, when necessary, compare the existing rotor dimensions to determine the correct configuration. 

Key Features

• OE-equivalent Brembo Prime front brake rotor
• Fits 1986–1995 Toyota 4Runner 4WD
• UV coated for corrosion protection
• Two production-specific front rotor configurations
• Vented rotor construction
• Six-hole mounting design
• 100 mm centering diameter
• Vehicle-specific direct-fit replacement
• ECE R90 type-approved
• Available individually or as a pair

Front Rotor Selection by Production Date

1986–05/1991

• Outside Diameter: 289 mm
• New Rotor Thickness: 20 mm
• Minimum Safe Thickness: 18 mm
• Overall Height: 65 mm
• Centering Diameter: 100 mm
• Mounting Hole Quantity: 6
• Rotor Construction: Vented

06/1991–1995

• Outside Diameter: 291 mm
• New Rotor Thickness: 25 mm
• Minimum Safe Thickness: 23 mm
• Overall Height: 66 mm
• Centering Diameter: 100 mm
• Mounting Hole Quantity: 6
• Rotor Construction: Vented

The 20 mm versus 25 mm new rotor thickness provides an additional way to identify the correct 1991 front brake configuration when the production date is uncertain.

Vehicle Fitment

Toyota 4Runner

• 1986–1989 Toyota 4Runner – 1st Gen – 4WD – Front – 289 × 20 mm Rotor
• 1990–05/1991 Toyota 4Runner – 2nd Gen – 4WD – Front – 289 × 20 mm Rotor
• 06/1991–1995 Toyota 4Runner – 2nd Gen – 4WD – Front – 291 × 25 mm Rotor

Fitment Notes

• Front application only
• 4WD models only
• Does not fit 2WD Toyota 4Runner models
• Two production-specific front rotor configurations are offered
• 1991 is a production-date split year
• Earlier configuration applies through 05/1991
• Later configuration begins 06/1991
• Select the correct Year / Production Range before ordering
• Existing rotor dimensions can help identify the correct 1991 configuration
• 289 × 20 mm = earlier configuration
• 291 × 25 mm = later configuration
• Available individually or as a pair
• Select a pair when replacing both front brake rotors

Product Specifications

Brand: Brembo
Series: Prime
Product Type: Disc Brake Rotor
Position: Front
Recommended Use: OE-Equivalent Replacement / Road Use
Finish: UV Coated
Rotor Design: Vented
Fit Type: Vehicle-Specific / Direct Fit
Drivetrain: 4WD
Mounting Hole Quantity: 6
Centering Diameter: 100 mm
Outside Diameter: 289 mm or 291 mm Depending on Application
New Rotor Thickness: 20 mm or 25 mm Depending on Application
Minimum Safe Thickness: 18 mm or 23 mm Depending on Application
Overall Height: 65 mm or 66 mm Depending on Application
Certification: ECE R90 Type-Approved

Available Configurations

Year / Production Range

• 1986–05/1991 – 289 × 20 mm vented front rotor
• 06/1991–1995 – 291 × 25 mm vented front rotor

Quantity

Single

• (1) Application-correct Brembo Prime UV Coated Front Brake Rotor

Pair

• (2) Matching application-correct Brembo Prime UV Coated Front Brake Rotors
• Provides both rotors needed to replace the driver- and passenger-side front brake rotors