{"title":"Old Man Emu Nitrocharger Plus Shocks","description":"\u003cp\u003eShop Old Man Emu Nitrocharger Plus front and rear shocks for classic Toyota Pickup and 4Runner applications. Start with the vehicle and mounting position below; model year alone does not determine every shock configuration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePickup 4WD: choose the front or rear Pickup product, then select the supported year range.\u003c\/li\u003e\n\u003cli\u003e4Runner front: choose the 1984–1995 4Runner front-shock product and its year range.\u003c\/li\u003e\n\u003cli\u003e4Runner rear: choose either the 1984–1989 or 1990–1995 product. These generations use separate rear-shock applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck the lift and suspension requirements on the selected product page. Medium\/heavy and single\/pair choices vary by application. This collection contains shocks; complete lift kits, springs and mounting hardware are sold separately.\u003c\/p\u003e","products":[{"product_id":"arb-ome-nitrocharger-plus-rear-shock-4wd-1979-95-pickup","title":"Old Man Emu Nitrocharger Plus Rear Shock | 4WD (1979-95 Pickup)","description":"\u003ch2\u003eARB | Old Man Emu Nitrocharger Plus Rear Shock \u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1979–1995 Toyota Pickup 4WD\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARB \/ Old Man Emu Nitrocharger Plus Rear Shock \u003c\/strong\u003eprovides application-specific damping for 1979–1995 Toyota Pickup 4WD rear suspension. The heavy-duty nitrogen-gas-charged twin-tube design supports everyday driving, hauling, rough roads, and off-road use. Choose the correct \u003cstrong\u003eYear Range\u003c\/strong\u003e, then \u003cstrong\u003eValving\u003c\/strong\u003e and \u003cstrong\u003eQuantity\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYear-specific configurations\u003c\/strong\u003e for three generations of Toyota Pickup 4WD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium and Heavy valving\u003c\/strong\u003e for different permanent vehicle loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty twin-tube steel body\u003c\/strong\u003e with nitrogen gas charge\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-flow piston and multi-disc damping\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal rear-shock mounting locations\u003c\/strong\u003e for each supported factory configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or matched pair\u003c\/strong\u003e purchase options\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThree-year limited warranty\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eNitrocharger Plus Design \u0026amp; Valving\u003c\/h2\u003e\n\u003cp\u003eThe twin-tube outer body protects the working cylinder, while the gas charge and vehicle-specific damping control suspension movement over changing surfaces and loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMedium — Best for Stock-Weight \u0026amp; Daily-Driven Pickups\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Medium if your Pickup remains near factory weight or has modest accessories and occasionally carries cargo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy — Best for Permanently Loaded Work \u0026amp; Overland Pickups\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Heavy when you carry considerable \u003cstrong\u003epermanent rear equipment\u003c\/strong\u003e such as a bumper, tire carrier, drawers, or tools. Valving should match normal loaded weight, not occasional cargo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese shocks do not create lift.\u003c\/strong\u003e Proper spring configuration and available shock travel determine compatibility with stock-height or mildly lifted rear suspension.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eStock Height \u0026amp; Lift Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThese rear shocks support \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003efactory rear ride height through approximately 2 inches of rear lift\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e when matched to the appropriate rear springs, normal vehicle load, mounting configuration, and suspension travel. For \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e1979–1988 Toyota Pickup 4WD\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e applications, the matching \u003c\/span\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/arb-ome-2-inch-rear-leaf-spring-4wd-1979-88-pickup-1984-89-4runner\"\u003e\u003cspan\u003e\u003cstrong\u003eOld Man Emu 2-Inch Suspension Lift Rear Leaf Springs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e provide the rear lift. For \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e1989–1995 Pickup 4WD\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e applications, use compatible rear leaf springs selected for the intended lift and load. \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eThe shock itself does not create vehicle lift.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Pickup\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1979–1983 Toyota Pickup – \u003cstrong\u003e1st Gen – 4WD – Rear\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e1984–1988 Toyota Pickup – \u003cstrong\u003e2nd Gen – 4WD – Rear\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e1989–1995 Toyota Pickup – \u003cstrong\u003e3rd Gen – 4WD – Rear\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e4WD models only; rear shock position only.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1979–1983 Pickup:\u003c\/strong\u003e Select the earlier factory rear-mounting application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1995 Pickup:\u003c\/strong\u003e Select the later factory rear-mounting application.\u003c\/li\u003e\n\u003cli\u003eThe factory early and later rear mounts differ; \u003cstrong\u003ethese year-range shocks are not interchangeable\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eFor modified mounts, axle conversions, or altered suspension travel, confirm actual shock dimensions and suspension clearance before ordering.\u003c\/li\u003e\n\u003cli\u003eEach Single fits either rear side; each Pair supplies two matching rear shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ARB \/ Old Man Emu\u003cbr\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e Nitrocharger Plus\u003cbr\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear left or right\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Heavy-duty steel twin-tube\u003cbr\u003e\u003cstrong\u003eGas Charged:\u003c\/strong\u003e Yes, nitrogen\u003cbr\u003e\u003cstrong\u003eValving:\u003c\/strong\u003e Medium or Heavy, non-adjustable\u003cbr\u003e\u003cstrong\u003eDrivetrain:\u003c\/strong\u003e 4WD\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Three-year limited\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich Rear Shock Should You Buy?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/kyb-stock-height-rear-shocks-4wd-1979-95-pickup\"\u003eKYB Excel-G\u003c\/a\u003e — Best for Factory-Style Comfort \u0026amp; Value\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose KYB Excel-G if your Toyota Pickup is at factory ride height and you want an affordable replacement with original-style ride comfort. Its gas-charged twin-tube design emphasizes comfortable, predictable damping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKYB Gas-a-Just — Best for Firmer Control on a Budget\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose KYB Gas-a-Just if you prefer a firmer, more responsive rear shock without stepping up to Bilstein. Its high-pressure gas monotube design may feel firmer with an unloaded bed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/bilstein-stock-ride-height-b6-4600-rear-shock-1979-95-pickup\"\u003eBilstein B6 4600\u003c\/a\u003e — Best for Overall Stock-Height Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Bilstein B6 4600 if you want more controlled rear suspension damping at factory ride height. Its high-pressure monotube design and digressive valving deliver a firmer, more controlled response for daily driving, highway travel, occasional towing, and light off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eARB \/ Old Man Emu Nitrocharger Plus — Best for OME Suspension Builds \u0026amp; Demanding Use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Old Man Emu Nitrocharger Plus if your Pickup has a matched OME suspension system, regularly travels rough terrain, or carries permanent additional equipment. Its heavy-duty gas-charged twin-tube design offers Medium and Heavy damping choices suited to different normal rear loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e For most Toyota Pickup owners maintaining factory rear ride height, \u003cstrong\u003eBilstein B6 4600 is our preferred all-around choice\u003c\/strong\u003e. Choose \u003cstrong\u003eKYB Excel-G\u003c\/strong\u003e for factory-style comfort and affordability, or \u003cstrong\u003eKYB Gas-a-Just\u003c\/strong\u003e for a firmer budget-friendly alternative. Choose \u003cstrong\u003eOld Man Emu Nitrocharger Plus\u003c\/strong\u003e when a matched suspension setup or permanent added weight calls for OME-specific damping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Rear Fitment Note:\u003c\/strong\u003e KYB Excel-G, KYB Gas-a-Just, and Bilstein B6 4600 are intended for factory-height rear suspension. Old Man Emu rear shocks must match the installed rear springs, normal vehicle load, mounting configuration, and available shock travel. Shock themselves do not create suspension lift.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1979-1983 \/ Medium \/ Single\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Old Man Emu Nitrocharger Plus rear shock for 1979-1983 Toyota Pickup 4WD with medium valving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e1979-1983 \/ Heavy \/ Single\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Old Man Emu Nitrocharger Plus rear shock for 1979-1983 Toyota Pickup 4WD with heavy valving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e1979-1983 \/ Medium \/ Pair\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Old Man Emu Nitrocharger Plus rear shock for 1979-1983 Toyota Pickup 4WD with medium valving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e1979-1983 \/ Heavy \/ Pair\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Old Man Emu Nitrocharger Plus rear shock for 1979-1983 Toyota Pickup 4WD with heavy valving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e1984-1995 \/ Medium \/ Single\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Old Man Emu Nitrocharger Plus rear shock for 1984-1995 Toyota Pickup 4WD with medium valving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e1984-1995 \/ Heavy \/ Single\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Old Man Emu Nitrocharger Plus rear shock for 1984-1995 Toyota Pickup 4WD with heavy valving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e1984-1995 \/ Medium \/ Pair\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Old Man Emu Nitrocharger Plus rear shock for 1984-1995 Toyota Pickup 4WD with medium valving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e1984-1995 \/ Heavy \/ Pair\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Old Man Emu Nitrocharger Plus rear shock for 1984-1995 Toyota Pickup 4WD with heavy valving\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ARB | Old Man EMU","offers":[{"title":"1979-1983 \/ Medium \/ Single","offer_id":67670074589493,"sku":"462","price":129.95,"currency_code":"USD","in_stock":true},{"title":"1979-1983 \/ Heavy \/ Single","offer_id":67670074622261,"sku":"463","price":129.95,"currency_code":"USD","in_stock":true},{"title":"1979-1983 \/ Medium \/ Pair","offer_id":67670074655029,"sku":"1351","price":259.9,"currency_code":"USD","in_stock":true},{"title":"1979-1983 \/ Heavy \/ Pair","offer_id":67670074687797,"sku":"465","price":259.9,"currency_code":"USD","in_stock":true},{"title":"1984-1995 \/ Medium \/ Single","offer_id":52461531889973,"sku":"356","price":129.95,"currency_code":"USD","in_stock":true},{"title":"1984-1995 \/ Heavy \/ Single","offer_id":52461531922741,"sku":"357","price":129.95,"currency_code":"USD","in_stock":true},{"title":"1984-1995 \/ Medium \/ Pair","offer_id":52999392100661,"sku":"460","price":259.9,"currency_code":"USD","in_stock":true},{"title":"1984-1995 \/ Heavy \/ Pair","offer_id":52999392133429,"sku":"461","price":259.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/1logos_1_3_11173c5d-8e31-4373-aec1-ef3c477aebdb.png?v=1791661607"},{"product_id":"arb-ome-nitrocharger-plus-front-shock-4wd-1979-95-pickup","title":"Old Man Emu Nitrocharger Plus Front Shock | 4WD (1979-95 Pickup)","description":"\u003ch2\u003eARB | Old Man Emu Nitrocharger Plus Front Shock \u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1979–1995 Toyota Pickup 4WD\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARB Old Man Emu Nitrocharger Plus Front Shock \u003c\/strong\u003eprovides vehicle-specific damping for Toyota Pickup 4WD front suspensions. This listing combines the \u003cstrong\u003e1979–1985 solid-front-axle shock\u003c\/strong\u003e and the \u003cstrong\u003e1986–1995 independent-front-suspension (IFS) shock\u003c\/strong\u003e into one product with clearly separated year-range choices.\u003c\/p\u003e\n\u003cp\u003eThe early solid-axle option is intended for \u003cstrong\u003ematched Old Man Emu front leaf springs and approximately 2 inches of front lift\u003c\/strong\u003e. The later IFS option is intended for stock-height through approximately 2-inch-lift front suspension. These two shocks have different travel and mounting applications and must not be substituted for one another.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific valving\u003c\/strong\u003e tuned for the applicable front suspension and spring system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty twin-tube steel construction\u003c\/strong\u003e with nitrogen gas charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-flow piston and multi-disc damping control\u003c\/strong\u003e help maintain predictable suspension response on paved roads, rough roads, and trails.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber \/ polyurethane mounting bushes\u003c\/strong\u003e selected for the applicable shock.\u003c\/li\u003e\n\u003cli\u003eSold as \u003cstrong\u003eone front shock or a matching front pair\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eNitrocharger Plus Design\u003c\/h2\u003e\n\u003cp\u003eNitrocharger Plus shocks use a protective twin-tube steel body and application-specific compression and rebound damping. Their high-flow internal design and gas charge help maintain damping control through repeated suspension movement on uneven roads and trails.\u003c\/p\u003e\n\u003cp\u003eFor an older leaf-sprung solid axle, shock length and damping must work with the matched leaf-spring travel. For the later torsion-bar IFS suspension, the shorter front-shock application retains the factory mounting arrangement.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eStock Height \u0026amp; Lift Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e1979–1985 solid-front-axle\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e shocks are designed for matched Old Man Emu front leaf springs at approximately 2 inches of lift. The \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e1986–1995 IFS\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e shocks support factory front ride height through approximately 2 inches of front lift.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e1986–1988 Pickup 4WD IFS\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e models, the matching \u003c\/span\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/arb-ome-heavy-duty-front-torsion-bars-4wd-ifs-1986-95-pickup-1986-89-4runner\"\u003e\u003cspan\u003e\u003cstrong\u003eOld Man Emu Heavy-Duty Front Torsion Bars\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e support the front suspension and additional accessory weight. Front ride height is determined by the springs or torsion-bar suspension and its adjustment; \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ethe shock itself does not create vehicle lift\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Pickup\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1979–1983 Toyota Pickup – 1st Gen – 4WD – Solid Front Axle – Matched OME front leaf springs \/ approximately 2-inch lift\u003c\/li\u003e\n\u003cli\u003e1984–1985 Toyota Pickup – 2nd Gen – 4WD – Solid Front Axle – Matched OME front leaf springs \/ approximately 2-inch lift\u003c\/li\u003e\n\u003cli\u003e1986–1988 Toyota Pickup – 2nd Gen – 4WD – Independent Front Suspension – Stock height to approximately 2-inch lift\u003c\/li\u003e\n\u003cli\u003e1989–1995 Toyota Pickup – 3rd Gen – 4WD – Independent Front Suspension – Stock height to approximately 2-inch lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e4WD Pickup only; does not fit 2WD Pickup.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1979–1985:\u003c\/strong\u003e Factory solid front axle with matched Old Man Emu front leaf springs. Confirm the OME spring system and required shock travel before ordering. Do not select this longer shock for a stock-height vehicle without that suspension setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1995:\u003c\/strong\u003e Factory independent front suspension. The standard IFS front shock can be used at stock height or with approximately 2 inches of front lift when its travel and original mount locations are retained.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot interchangeable across the 1985 \/ 1986 solid-axle-to-IFS break.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eNot for Toyota Tacoma, solid-axle-converted IFS trucks, long-travel setups, or relocated shock mounts.\u003c\/li\u003e\n\u003cli\u003eBoth driver and passenger front positions use the same shock within the correct year-range choice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ARB \/ Old Man Emu\u003cbr\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e Nitrocharger Plus\u003cbr\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Front left or right\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Nitrogen-gas-charged twin-tube steel body\u003cbr\u003e\u003cstrong\u003eDamping:\u003c\/strong\u003e Vehicle-specific; non-adjustable\u003cbr\u003e\u003cstrong\u003eDrivetrain:\u003c\/strong\u003e Toyota Pickup 4WD\u003cbr\u003e\u003cstrong\u003e1979–1985 Solid-Axle Extended Length:\u003c\/strong\u003e 479 mm \/ 18.86 in.\u003cbr\u003e\u003cstrong\u003e1979–1985 Solid-Axle Compressed Length:\u003c\/strong\u003e 294 mm \/ 11.57 in.\u003cbr\u003e\u003cstrong\u003e1979–1985 Solid-Axle Mounts:\u003c\/strong\u003e Upper threaded pin \/ lower bushed eye\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Three-year limited warranty\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eWhich Front Shock Should You Buy?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/kyb-excel-g-front-shock-stock-height-1979-95-pickup-4wd?variant=67627744297269\" rel=\"noopener\" target=\"_blank\"\u003eKYB Excel-G\u003c\/a\u003e — Best for Factory-Style Comfort \u0026amp; Value\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChoose KYB Excel-G for an affordable, factory-style replacement that prioritizes comfortable everyday driving and original-style ride quality at stock height. Its gas-charged twin-tube design emphasizes smooth, predictable damping.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/kyb-excel-g-front-shock-stock-height-1979-95-pickup-4wd?variant=67671746183477\" rel=\"noopener\" target=\"_blank\"\u003eKYB Gas-a-Just\u003c\/a\u003e — Best for Firmer Stock-Height Control\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChoose KYB Gas-a-Just for firmer, more responsive monotube damping without stepping up to Bilstein. It provides a more controlled ride feel without changing suspension height or vehicle payload capacity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/bilstein-stock-ride-height-b6-4600-front-shock-1979-95-pickup\"\u003e\u003cstrong\u003e\u003cspan\u003eBilstein B6 4600\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003cspan\u003e — Best for Overall Stock-Height Performance\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChoose Bilstein B6 4600 for premium monotube damping with velocity-sensitive digressive valving that provides controlled, responsive handling during daily driving, highway travel, and light off-road use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eARB \/ Old Man Emu Nitrocharger Plus\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e — Best for OME Suspension Builds \u0026amp; Demanding Use\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChoose OME Nitrocharger Plus for matched OME suspension setups, frequent rough-road use, or vehicles carrying additional equipment weight. The 1979–1985 solid-axle version is intended for matched OME front leaf springs with approximately 2 inches of lift, while the 1986–1995 IFS version supports stock height through approximately 2 inches of lift.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eOur Recommendation:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e For most stock-height Toyota Pickup 4WD owners, \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBilstein B6 4600\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is our preferred all-around choice. Choose \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eKYB Excel-G\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e for comfort and value, \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eKYB Gas-a-Just\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e for firmer budget-friendly control, or \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eOld Man Emu Nitrocharger Plus\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e for compatible OME suspension builds and more demanding use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOn 1986–1988 Pickup 4WD IFS models, these front shocks also appear in the \u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/arb-ome-complete-2-lift-kit-4wd-1986-89-4runner-pickup\"\u003eOld Man Emu Complete 2-Inch Suspension Lift Kit\u003c\/a\u003e\u003c\/strong\u003e, which pairs the shocks with matching suspension components.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eAvailable Configurations\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eChoose your preferred configuration using the available vehicle-year and quantity options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e1. Vehicle Year\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e1979–1985:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Toyota Pickup 4WD with factory solid front axle and matched Old Man Emu front leaf springs with approximately 2 inches of lift. Not intended as a standard stock-height replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e1986–1995:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Toyota Pickup 4WD with factory independent front suspension (IFS), compatible with stock height through approximately 2 inches of front lift using factory-style shock mounts.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e2. Quantity\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSingle:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Includes (1) ARB \/ Old Man Emu Nitrocharger Plus front shock with manufacturer-supplied mounting bushings, washers, and fittings for one shock.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePair:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Includes (2) matching ARB \/ Old Man Emu Nitrocharger Plus front shock with manufacturer-supplied mounting bushings, washers, and fittings for both shocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eNot Included:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Front leaf springs, torsion bars, factory lower mounting bolts, or other suspension-lift components.\u003c\/span\u003e\u003c\/p\u003e","brand":"ARB | Old Man EMU","offers":[{"title":"1979-1985 \/ Single","offer_id":67669769421109,"sku":"1376","price":129.95,"currency_code":"USD","in_stock":true},{"title":"1979-1985 \/ Pair","offer_id":67669769453877,"sku":"1378","price":259.9,"currency_code":"USD","in_stock":true},{"title":"1986-1995 \/ Single","offer_id":52999382139189,"sku":"358","price":129.95,"currency_code":"USD","in_stock":true},{"title":"1986-1995 \/ Pair","offer_id":52999382171957,"sku":"459","price":259.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/1logos_1_2_1bca59c7-c268-4ada-9e06-4dd13d1595d5.png?v=1791653934"},{"product_id":"arb-ome-nitrocharger-plus-rear-shock-absorber-4wd-1984-1989-4runner","title":"Old Man Emu Nitrocharger Plus Rear Shock (1984-89 4Runner)","description":"\u003ch2\u003eARB | Old Man Emu Nitrocharger Plus Rear Shock \u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1984–1989 Toyota 4Runner \u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARB Old Man Emu Nitrocharger Plus Rear Shock \u003c\/strong\u003eis a vehicle-specific rear suspension upgrade for 1984–1989 Toyota 4Runner 4WD models with rear leaf springs. Medium and Heavy load-capacity choices let you match rear-shock tuning to the vehicle’s normal operating weight and permanent equipment.\u003c\/p\u003e\n\u003cp\u003eIts heavy-duty twin-tube, nitrogen gas-charged design provides controlled damping for daily driving, towing, hauling, overlanding, rough roads, and off-road terrain.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific tuning for 1st Gen 4Runner rear leaf-spring suspension\u003c\/li\u003e\n\u003cli\u003eMedium and Heavy load-capacity choices\u003c\/li\u003e\n\u003cli\u003eDesigned for \u003cstrong\u003estock ride height through approximately 2 inches of rear lift\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeavy-duty twin-tube steel construction\u003c\/li\u003e\n\u003cli\u003eNitrogen gas-charged design\u003c\/li\u003e\n\u003cli\u003eHigh-flow piston with multi-disc compression valving\u003c\/li\u003e\n\u003cli\u003eDirect fit at the factory rear shock mounting locations\u003c\/li\u003e\n\u003cli\u003eAvailable individually or as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eNitrocharger Plus Design\u003c\/h2\u003e\n\u003cp\u003eThe Nitrocharger Plus uses a durable \u003cstrong\u003etwin-tube steel shock body\u003c\/strong\u003e to protect critical internal components during demanding road and trail use. Its nitrogen gas charge, high-flow piston, and multi-disc valving help maintain consistent damping as the rear suspension moves through changing terrain and vehicle loads.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eStock Height \u0026amp; Lift Compatibility\u003c\/h2\u003e\n\u003cp\u003eThese rear shocks support \u003cstrong\u003efactory rear ride height through approximately 2 inches of rear lift\u003c\/strong\u003e. The matching \u003ca href=\"https:\/\/preserverad.com\/products\/arb-ome-2-inch-rear-leaf-spring-4wd-1979-88-pickup-1984-89-4runner\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003eOld Man Emu 2-Inch Suspension Lift Rear Leaf Springs\u003c\/strong\u003e\u003c\/a\u003e provide the rear lift; the shock itself does not create vehicle lift.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota 4Runner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1984–1989 Toyota 4Runner – \u003cstrong\u003e1st Gen – 4WD – Rear Leaf-Spring Suspension\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChoose Medium or Heavy load capacity based on normal operating weight and permanent equipment.\u003c\/li\u003e\n\u003cli\u003eEngine and transmission choice do not change this rear-shock application.\u003c\/li\u003e\n\u003cli\u003eDesigned for stock ride height through approximately \u003cstrong\u003e2 inches of rear lift\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eUses the factory rear shock mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ARB \/ Old Man Emu\u003cbr\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e Nitrocharger Plus\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rear Shock \u003cbr\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Twin Tube\u003cbr\u003e\u003cstrong\u003eGas Charged:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eBody Material:\u003c\/strong\u003e Steel\u003cbr\u003e\u003cstrong\u003eBushings:\u003c\/strong\u003e Rubber \/ Polyurethane\u003cbr\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\u003cbr\u003e\u003cstrong\u003eRide Height:\u003c\/strong\u003e Stock to Approximately 2-Inch Rear Lift\u003cbr\u003e\u003cstrong\u003eRear Suspension:\u003c\/strong\u003e Leaf Spring\u003cbr\u003e\u003cstrong\u003eDrivetrain:\u003c\/strong\u003e 4WD\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3-Year Limited Warranty\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich Rear Shock Should You Buy?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/kyb-gas-a-just-stock-height-rear-shock-1984-95-4runner?variant=67672453579061\" rel=\"noopener\" target=\"_blank\"\u003eKYB Excel-G\u003c\/a\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/kyb-excel-g-front-shock-stock-height-1979-95-pickup-4wd?variant=67627744297269\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e — Best for Factory-Style Comfort \u0026amp; Value\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose KYB Excel-G for an affordable, factory-style replacement that prioritizes comfortable everyday driving and original-style ride quality at stock height. Its gas-charged twin-tube design emphasizes smooth, predictable damping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/kyb-gas-a-just-stock-height-rear-shock-1984-95-4runner?variant=67665836114229\" rel=\"noopener\" target=\"_blank\"\u003eKYB Gas-a-Just\u003c\/a\u003e — Best for Firmer Stock-Height Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose KYB Gas-a-Just for firmer, more responsive monotube damping without stepping up to Bilstein. It offers a more controlled ride feel without changing suspension height or vehicle load capacity.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/bilstein-stock-ride-height-b6-4600-rear-shock-1984-95-4runner\"\u003e\u003cstrong\u003eBilstein B6 4600\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e — Best for Overall Stock-Height Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Bilstein B6 4600 for premium monotube damping with controlled, responsive handling during daily driving, highway travel, and light off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eARB \/ Old Man Emu Nitrocharger Plus\u003c\/strong\u003e\u003cstrong\u003e — Best for OME Suspension Builds \u0026amp; Added Weight\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose OME Nitrocharger Plus for 1984–1989 4Runner 4WD models with matched OME suspension setups, frequent rough-road use, or additional permanent equipment weight. Medium and Heavy valving options support stock height through approximately 2 inches of rear lift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e For most stock-height Toyota 4Runner owners, \u003cstrong\u003eBilstein B6 4600\u003c\/strong\u003e is our preferred all-around choice. Choose \u003cstrong\u003eKYB Excel-G\u003c\/strong\u003e for factory-style comfort and value, \u003cstrong\u003eKYB Gas-a-Just\u003c\/strong\u003e for firmer budget-friendly control, or \u003cstrong\u003eOld Man Emu Nitrocharger Plus\u003c\/strong\u003e for 1984–1989 4WD suspension builds and more demanding use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003eChoose the correct \u003cstrong\u003eLoad Capacity\u003c\/strong\u003e and \u003cstrong\u003eQuantity\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. Load Capacity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium:\u003c\/strong\u003e Rear-shock tuning for stock-weight or moderately modified 1st Gen 4Runners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy:\u003c\/strong\u003e Firmer rear-shock tuning for 1st Gen 4Runners carrying constant additional weight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2. Quantity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle:\u003c\/strong\u003e Includes (1) rear shock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair:\u003c\/strong\u003e Includes (2) matching rear shock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth load-capacity choices are available individually or as a pair.\u003c\/p\u003e","brand":"ARB | Old Man EMU","offers":[{"title":"Medium \/ Single","offer_id":53420287295797,"sku":"356","price":129.95,"currency_code":"USD","in_stock":true},{"title":"Medium \/ Pair","offer_id":53420287361333,"sku":"460","price":259.9,"currency_code":"USD","in_stock":true},{"title":"Heavy \/ Single","offer_id":53420287328565,"sku":"357","price":129.95,"currency_code":"USD","in_stock":true},{"title":"Heavy \/ Pair","offer_id":53420287394101,"sku":"461","price":259.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/1_a7eaa896-4247-4ff0-b26b-f241752665d1.png?v=1791661606"},{"product_id":"arb-ome-nitrocharger-plus-front-shock-absorber-1984-95-4runner","title":"Old Man Emu Nitrocharger Plus Front Shock (1984-95 4Runner)","description":"\u003ch2\u003eARB | Old Man Emu Nitrocharger Plus Front Shock \u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1984–1995 Toyota 4Runner\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARB Old Man Emu Nitrocharger Plus Front Shock \u003c\/strong\u003eoffers application-specific front suspension damping for both generations of 1984–1995 Toyota 4Runner. The \u003cstrong\u003e1984–1985 solid-front-axle\u003c\/strong\u003e option is intended for matched Old Man Emu front leaf springs with approximately 2 inches of lift; the \u003cstrong\u003e1986–1995 IFS\u003c\/strong\u003e version covers original front-shock mounting points at stock height through approximately 2 inches of lift.\u003c\/p\u003e\n\u003cp\u003eChoose your model-year range before selecting a Single shock or a matching Pair. The longer leaf-spring shock and the later IFS shock are not interchangeable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific valving\u003c\/strong\u003e for the matching Toyota front suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty twin-tube steel body\u003c\/strong\u003e and nitrogen gas charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-flow piston and multi-disc damping control\u003c\/strong\u003e for repeatable suspension response.\u003c\/li\u003e\n\u003cli\u003eSuitable for matched Old Man Emu suspension systems, on-road driving, hauling, and off-road travel.\u003c\/li\u003e\n\u003cli\u003eAvailable individually or as a \u003cstrong\u003ematching front pair\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eNitrocharger Plus Design\u003c\/h2\u003e\n\u003cp\u003eThe heavy-duty twin-tube shock design protects its working cylinder in demanding conditions. The gas charge and application-specific damping help maintain suspension control as the front axle or independent suspension moves through road and trail irregularities.\u003c\/p\u003e\n\u003cp\u003eSolid-front-axle 4Runners use longer shocks matched to the leaf-spring travel; 1986-on IFS models use a different mounting and travel application.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch2\u003e\u003cspan\u003eStock Height \u0026amp; Lift Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e1984–1985 solid-front-axle\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e shocks are designed for matched Old Man Emu front leaf springs at approximately 2 inches of lift. The \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e1986–1995 IFS\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e shocks support factory front ride height through approximately 2 inches of front lift.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e1986–1989 4Runner 4WD IFS\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e models, the matching \u003c\/span\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/arb-ome-heavy-duty-front-torsion-bars-4wd-ifs-1986-95-pickup-1986-89-4runner\"\u003e\u003cspan\u003e\u003cstrong\u003eOld Man Emu Heavy-Duty Front Torsion Bars\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e support the front suspension and additional accessory weight. Front ride height is determined by the springs or torsion-bar suspension and its adjustment; \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ethe shock itself does not create vehicle lift\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota 4Runner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1984–1985 Toyota 4Runner – 1st Gen – 4WD – Solid Front Axle – Matched OME front leaf springs \/ approximately 2-inch lift\u003c\/li\u003e\n\u003cli\u003e1986–1989 Toyota 4Runner – 1st Gen – 4WD – Independent Front Suspension – Stock height to approximately 2-inch lift\u003c\/li\u003e\n\u003cli\u003e1990–1995 Toyota 4Runner – 2nd Gen – 2WD \/ 4WD – Independent Front Suspension – Stock height to approximately 2-inch lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1985 4Runner:\u003c\/strong\u003e Factory 4WD solid-front-axle models using matched OME front leaf springs; requires the proper OME spring and shock-travel combination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989 4Runner:\u003c\/strong\u003e Factory 4WD independent front suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1995 4Runner:\u003c\/strong\u003e Factory 2WD or 4WD independent front suspension.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1984–1985 solid-axle and 1986–1995 IFS shock options are not interchangeable.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eNot for 1996-onward 4Runner, suspension-converted vehicles, long-travel designs, or relocated shock mounts.\u003c\/li\u003e\n\u003cli\u003eEach Single option fits either the left or right front; Pair includes two matching front shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ARB \/ Old Man Emu\u003cbr\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e Nitrocharger Plus\u003cbr\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Front left or right\u003cbr\u003e\u003cstrong\u003eBody:\u003c\/strong\u003e Steel, twin-tube construction\u003cbr\u003e\u003cstrong\u003eGas Charged:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDamping:\u003c\/strong\u003e Application-specific and non-adjustable\u003cbr\u003e\u003cstrong\u003eSolid-Axle Extended Length:\u003c\/strong\u003e 479 mm \/ 18.86 in.\u003cbr\u003e\u003cstrong\u003eSolid-Axle Compressed Length:\u003c\/strong\u003e 294 mm \/ 11.57 in.\u003cbr\u003e\u003cstrong\u003eSolid-Axle Mounts:\u003c\/strong\u003e Threaded-pin upper \/ bushed-eye lower\u003cbr\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Three-year limited warranty\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich Front Shock Should You Buy?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/kyb-excel-g-stock-height-front-shock-1984-95-4runner?variant=67669728592181\" rel=\"noopener\" target=\"_blank\"\u003eKYB Excel-G\u003c\/a\u003e — Best for Factory-Style Comfort \u0026amp; Value\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChoose KYB Excel-G for an affordable, factory-style replacement that prioritizes comfortable everyday driving and original-style ride quality at stock height.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/kyb-excel-g-stock-height-front-shock-1984-95-4runner?variant=67671746249013\" rel=\"noopener\" target=\"_blank\"\u003eKYB Gas-a-Just\u003c\/a\u003e — Best for Firmer Stock-Height Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChoose KYB Gas-a-Just for firmer, more responsive monotube damping without stepping up to Bilstein. It offers a more controlled ride feel without changing suspension height or vehicle load capacity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/bilstein-b6-4600-front-shock-stock-height-1984-95-4runner?_pos=8\u0026amp;_sid=475ec16d6\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eBilstein B6 4600\u003c\/a\u003e — Best for Overall Stock-Height Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChoose Bilstein B6 4600 for premium monotube damping with controlled, responsive handling during daily driving, highway travel, and light off-road use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eARB \/ Old Man Emu Nitrocharger Plus — Best for OME Suspension Builds \u0026amp; Demanding Use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChoose OME Nitrocharger Plus for matched OME suspension setups, frequent rough-road use, or vehicles carrying additional equipment weight. Suitable for supported 1986–1995 4WD IFS applications at stock height through approximately 2 inches of front lift.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e\u003cspan\u003e For most stock-height Toyota 4Runner owners, \u003c\/span\u003e\u003cstrong\u003eBilstein B6 4600\u003c\/strong\u003e\u003cspan\u003e is our preferred all-around choice. Choose \u003c\/span\u003e\u003cstrong\u003eKYB Excel-G\u003c\/strong\u003e\u003cspan\u003e for comfort and value, \u003c\/span\u003e\u003cstrong\u003eKYB Gas-a-Just\u003c\/strong\u003e\u003cspan\u003e for firmer budget-friendly control, or \u003c\/span\u003e\u003cstrong\u003eOld Man Emu Nitrocharger Plus\u003c\/strong\u003e\u003cspan\u003e for compatible OME suspension builds and more demanding use.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cspan\u003eAvailable Configurations\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eChoose your preferred configuration using the available vehicle-year and quantity options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e1. Vehicle Year\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e1984-1985:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 4WD solid front axle with matched Old Man Emu front leaf springs.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e1986-1989:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Factory independent front suspension (IFS).\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e1990-1995:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Factory independent front suspension (IFS).\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e2. Quantity\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSingle:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Includes (1) ARB \/ Old Man Emu Nitrocharger Plus front shock with manufacturer-supplied mounting bushings and fittings for one shock.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePair:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Includes (2) matching ARB \/ Old Man Emu Nitrocharger Plus front shock with manufacturer-supplied mounting bushings and fittings for both shocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eNot Included:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Front leaf springs, torsion bars, lower shock mounting hardware, or other suspension-lift components.\u003c\/span\u003e\u003c\/p\u003e","brand":"ARB | Old Man EMU","offers":[{"title":"1984-1985 \/ Single","offer_id":67669771551029,"sku":"1372","price":129.95,"currency_code":"USD","in_stock":true},{"title":"1984-1985 \/ Pair","offer_id":67669771583797,"sku":"1373","price":259.9,"currency_code":"USD","in_stock":true},{"title":"1986-1989 \/ Single","offer_id":53420287721781,"sku":"358","price":129.95,"currency_code":"USD","in_stock":true},{"title":"1986-1989 \/ Pair","offer_id":53420287754549,"sku":"459","price":259.9,"currency_code":"USD","in_stock":true},{"title":"1990-1995 \/ Single","offer_id":67669771616565,"sku":"1374","price":129.95,"currency_code":"USD","in_stock":true},{"title":"1990-1995 \/ Pair","offer_id":67669771649333,"sku":"1375","price":259.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/1logos_1_2_1bca59c7-c268-4ada-9e06-4dd13d1595d5.png?v=1791653934"},{"product_id":"arb-ome-nitrocharger-plus-rear-shock-1990-1995-toyota-4runner","title":"Old Man Emu  Nitrocharger Plus Rear Shock (1990-95 4Runner)","description":"\u003ch2\u003eARB | Old Man Emu Nitrocharger Plus Rear Shock \u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1990–1995 Toyota 4Runner 4WD\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARB Old Man Emu Nitrocharger Plus Rear Shock \u003c\/strong\u003eis the dedicated rear-coil shock application for 1990–1995 Toyota 4Runner 4WD models. This application uses one rear-shock tune with compatible Old Man Emu rear coil springs, so the only customer choice is quantity.\u003c\/p\u003e\n\u003cp\u003eIts heavy-duty twin-tube, nitrogen gas-charged design provides controlled damping for daily driving, towing, hauling, overlanding, rough roads, and off-road terrain.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific tuning for 2nd Gen 4Runner rear coil-spring suspension\u003c\/li\u003e\n\u003cli\u003eOne dedicated rear-shock application\u003c\/li\u003e\n\u003cli\u003eDesigned for \u003cstrong\u003estock ride height through approximately 2 inches of rear lift\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeavy-duty twin-tube steel construction\u003c\/li\u003e\n\u003cli\u003eNitrogen gas-charged design\u003c\/li\u003e\n\u003cli\u003eHigh-flow piston with multi-disc compression valving\u003c\/li\u003e\n\u003cli\u003eDirect fit at the factory rear shock mounting locations\u003c\/li\u003e\n\u003cli\u003eAvailable individually or as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eNitrocharger Plus Design\u003c\/h2\u003e\n\u003cp\u003eThe Nitrocharger Plus uses a durable \u003cstrong\u003etwin-tube steel shock body\u003c\/strong\u003e to protect critical internal components during demanding road and trail use. Its nitrogen gas charge, high-flow piston, and multi-disc valving help maintain consistent damping as the rear suspension moves through changing terrain and vehicle loads.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eStock Height \u0026amp; Lift Compatibility\u003c\/h2\u003e\n\u003cp\u003eThis rear shock supports \u003cstrong\u003efactory rear ride height through approximately 2 inches of rear lift\u003c\/strong\u003e. The shock does not create vehicle lift; rear ride height and load support are determined by the coil springs and the overall suspension configuration.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota 4Runner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1990–1995 Toyota 4Runner – \u003cstrong\u003e2nd Gen – 4WD – Rear Coil-Spring Suspension\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis year group uses one dedicated rear-shock tune; there are no separate Medium and Heavy shock variants.\u003c\/li\u003e\n\u003cli\u003eThe same rear shock can be paired with the appropriate compatible OME rear coil spring selected for vehicle load.\u003c\/li\u003e\n\u003cli\u003eEngine and transmission choice do not change this rear-shock application.\u003c\/li\u003e\n\u003cli\u003eDesigned for stock ride height through approximately \u003cstrong\u003e2 inches of rear lift\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eUses the factory rear shock mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ARB \/ Old Man Emu\u003cbr\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e Nitrocharger Plus\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rear Shock \u003cbr\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Twin Tube\u003cbr\u003e\u003cstrong\u003eGas Charged:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eBody Material:\u003c\/strong\u003e Steel\u003cbr\u003e\u003cstrong\u003eBushings:\u003c\/strong\u003e Rubber \/ Polyurethane\u003cbr\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Yellow\u003cbr\u003e\u003cstrong\u003eRide Height:\u003c\/strong\u003e Stock to Approximately 2-Inch Rear Lift\u003cbr\u003e\u003cstrong\u003eRear Suspension:\u003c\/strong\u003e Coil Spring\u003cbr\u003e\u003cstrong\u003eDrivetrain:\u003c\/strong\u003e 4WD\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3-Year Limited Warranty\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich Rear Shock Should You Buy?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/kyb-gas-a-just-stock-height-rear-shock-1984-95-4runner?variant=67672453579061\" rel=\"noopener\" target=\"_blank\"\u003eKYB Excel-G\u003c\/a\u003e — Best for Factory-Style Comfort \u0026amp; Value\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose KYB Excel-G for an affordable, factory-style replacement that prioritizes comfortable everyday driving and original-style ride quality at stock height. Its gas-charged twin-tube design emphasizes smooth, predictable damping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/kyb-gas-a-just-stock-height-rear-shock-1984-95-4runner?variant=67665836114229\" rel=\"noopener\" target=\"_blank\"\u003eKYB Gas-a-Just\u003c\/a\u003e — Best for Firmer Stock-Height Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose KYB Gas-a-Just for firmer, more responsive monotube damping without stepping up to Bilstein. It offers a more controlled ride feel without changing suspension height or vehicle load capacity.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/bilstein-stock-ride-height-b6-4600-rear-shock-1984-95-4runner\"\u003e\u003cstrong\u003eBilstein B6 4600\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e — Best for Overall Stock-Height Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Bilstein B6 4600 for premium monotube damping with controlled, responsive handling during daily driving, highway travel, and light off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eARB \/ Old Man Emu Nitrocharger Plus\u003c\/strong\u003e\u003cstrong\u003e — Best for OME Suspension Builds \u0026amp; Added Weight\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose OME Nitrocharger Plus for 1990–1995 4Runner 4WD models with matched OME suspension setups, frequent rough-road use, or additional permanent equipment weight. This application uses one rear-shock tune with compatible OME rear coil springs selected for vehicle load; choose Single or Pair here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e For most stock-height Toyota 4Runner owners, \u003cstrong\u003eBilstein B6 4600\u003c\/strong\u003e is our preferred all-around choice. Choose \u003cstrong\u003eKYB Excel-G\u003c\/strong\u003e for factory-style comfort and value, \u003cstrong\u003eKYB Gas-a-Just\u003c\/strong\u003e for firmer budget-friendly control, or \u003cstrong\u003eOld Man Emu Nitrocharger Plus\u003c\/strong\u003e for 1990–1995 4WD suspension builds and more demanding use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003eChoose the required \u003cstrong\u003eQuantity\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle:\u003c\/strong\u003e Includes (1) rear shock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair:\u003c\/strong\u003e Includes (2) matching rear shock.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ARB | Old Man EMU","offers":[{"title":"Single","offer_id":67672662409525,"sku":"1389","price":129.95,"currency_code":"USD","in_stock":true},{"title":"Pair","offer_id":67672662442293,"sku":"1390","price":259.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/old-man-emu-nitrocharger-plus-rear-shock-absorber-06.png?v=1792551064"}],"url":"https:\/\/preserverad.com\/collections\/old-man-emu-nitrocharger-plus-shocks.oembed","provider":"Preserve Rad","version":"1.0","type":"link"}