{"title":"AE92 Corolla Engine Parts | 1988–1991","description":"\u003cp\u003eBrowse \u003cstrong\u003eengine parts for 1988–1991 AE92 Corolla\u003c\/strong\u003e models, selected from Preserve Rad’s vehicle catalog. Use this collection to plan restoration, maintenance or upgrades, then review each part’s specific fitment before ordering.\u003c\/p\u003e\u003ch2\u003eConfirm the engine application\u003c\/h2\u003e\u003cp\u003eThis collection follows the 1988–1991 AE92 applications listed by Preserve Rad. Confirm body style, trim and engine against the individual part’s application. Confirm the engine code, production date and installed configuration. Similar-looking components can differ by engine, induction system, transmission or a previous swap.\u003c\/p\u003e\u003cp\u003eA collection groups related applications; every part shown is not suitable for every vehicle in the range. For help with a build-date split, conversion or uncertain application, \u003ca href=\"\/pages\/fitment-help\"\u003esend us your vehicle details and photos\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/1988-1991-toyota-corolla-ae92-parts\"\u003eShop all 1988–1991 AE92 Corolla parts\u003c\/a\u003e · \u003ca href=\"\/pages\/guides\"\u003eExplore Toyota fitment guides\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eRestoration planning guides\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/blogs\/guides\/ae92-corolla-parts-identification-buying-guide\"\u003eAE92 Corolla Parts Identification \u0026amp; Buying Guide | 1988–1991\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing adjustable cam gears for a 16V 4A engine?\u003c\/strong\u003e Compare fitment, single-versus-pair options and manufacturer details in the \u003ca href=\"\/blogs\/guides\/hks-vs-tomei-4age-4agze-16v-cam-gears\"\u003eHKS vs. TOMEI Cam Gear Buying Guide\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"hks-fine-tune-high-performance-timing-belt-4age-4agze-16v-ae86-aw11-ae92","title":"HKS Fine Tune Timing Belt | 4A-GE \/ 4A-GZE 16V (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla \/ AE101 Corolla)","description":"\u003ch2\u003eHKS Fine Tune Timing Belt\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, 1987–1991 Toyota Corolla AE92 coupe, and 1991–1995 Toyota Corolla AE101 equipped with the 4A-GZE, all equipped with 4A-GE \/ 4A-GZE 16V timing systems using a 113R19.1 belt.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eHKS Fine Tune Timing Belt\u003c\/strong\u003e is a performance-oriented replacement for \u003cstrong\u003e4A-GE \/ 4A-GZE 16-valve timing systems using a 113R19.1 belt\u003c\/strong\u003e. Applications include 1983–1987 JDM Corolla AE86, 1985–1987 U.S.-Market Corolla Sport AE86 GT-S, 1984–1989 JDM and 1985–1989 U.S.-Market MR2 AW11, 1987–1991 JDM Corolla AE92 coupes, and 1988–1991 U.S.-Market Corolla AE92 GT-S. It also fits 1991–1995 JDM Corolla AE101 with the 4A-GZE; \u003cstrong\u003e20-valve 4A-GE timing systems are excluded\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eDeveloped for high-power and high-RPM engine use, the Fine Tune Timing Belt uses application-specific belt strength to help maintain stable tension as engine temperatures change. Its molded-tooth manufacturing process forms the belt teeth without the external compression used in conventional production methods, helping preserve tooth strength and reduce the potential for belt skipping under high engine load.\u003c\/p\u003e\n\u003cp\u003eHigh-strength \u003cstrong\u003eH-NBR tooth rubber\u003c\/strong\u003e provides additional durability for demanding street, track, naturally aspirated, and supercharged 4A applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePerformance timing belt for \u003cstrong\u003eToyota 4A-GE and 4A-GZE 16-valve engines\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e113R19.1\u003c\/strong\u003e belt size\u003c\/li\u003e\n\u003cli\u003eApplication-specific belt strength for high-power and high-RPM operation\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain stable belt tension as engine temperature changes\u003c\/li\u003e\n\u003cli\u003eMolded-tooth construction helps preserve tooth strength\u003c\/li\u003e\n\u003cli\u003eHelps reduce belt skipping under high engine load\u003c\/li\u003e\n\u003cli\u003eHigh-strength \u003cstrong\u003eH-NBR tooth rubber\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for naturally aspirated and supercharged 4A applications\u003c\/li\u003e\n\u003cli\u003eDesigned to pair well with adjustable cam gears and HKS Slide Cam Pulleys\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eH-NBR \u0026amp; Molded-Tooth Construction\u003c\/h2\u003e\n\u003cp\u003eConventional timing-belt manufacturing can form the teeth by applying pressure from the outside of the belt, placing additional stress on the tooth structure during production. The HKS Fine Tune Timing Belt instead uses a mold shaped around the finished tooth profile, allowing the teeth to be formed while preserving more of their structural strength.\u003c\/p\u003e\n\u003cp\u003eThe tooth section uses \u003cstrong\u003eH-NBR rubber\u003c\/strong\u003e for additional strength, while the belt itself is tuned for the intended engine application to provide stable operation during thermal expansion and demanding high-RPM use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Japanese-market Corolla Levin and Sprinter Trueno, 4A-GE \/ 4A-GZE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla Levin \/ Sprinter Trueno — AE101 — 7th Gen\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1991–1995:\u003c\/strong\u003e Japanese-market 4A-GZE 16V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTiming System:\u003c\/strong\u003e 4A-GE \/ 4A-GZE 16-valve engines using the 113R19.1 belt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e \u003cstrong\u003eNot for 20-valve 4A-GE timing systems or factory AE86 \/ AE92 SR5 engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine-swapped or modified vehicles require the 4A-GE \/ 4A-GZE 16-valve timing system using a 113R19.1 belt\u003c\/strong\u003e; chassis identity alone does not establish fitment.\u003c\/li\u003e\n\u003cli\u003eThis is a timing belt only; tensioners, bearings, seals and cam gears are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor independently adjustable intake and exhaust cam timing, the matching \u003ca href=\"https:\/\/preserverad.com\/products\/hks-adjustable-cam-gear-slide-cam-pulley\"\u003e\u003cstrong\u003eHKS Adjustable Cam Gears\u003c\/strong\u003e\u003c\/a\u003e are available separately.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e HKS\u003cbr\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e Fine Tune\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Timing Belt\u003cbr\u003e\u003cstrong\u003eEngine Application:\u003c\/strong\u003e Toyota 4A-GE \/ 4A-GZE 16-Valve\u003cbr\u003e\u003cstrong\u003eBelt Size:\u003c\/strong\u003e 113R19.1\u003cbr\u003e\u003cstrong\u003eTooth Material:\u003c\/strong\u003e High-Strength H-NBR Rubber\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Molded-Tooth Performance Timing Belt\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Naturally Aspirated \u0026amp; Supercharged\u003cbr\u003e\u003cstrong\u003eFit Type:\u003c\/strong\u003e Vehicle-Specific Replacement\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(1) HKS Fine Tune Timing Belt\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":53237847163189,"sku":"540","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/ChatGPTImageJul31_2026_01_24_31PM_37dbe230-e011-45d8-b834-b26f72930fd3.png?v=1790366966"},{"product_id":"hks-adjustable-cam-gear-slide-cam-pulley","title":"HKS Adjustable Cam Gear | 4A-GE \/ 4A-GZE 16V (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eHKS Adjustable Slide Cam Pulley\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with 4A-GE \/ 4A-GZE 16V camshaft and timing-belt systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe HKS Adjustable Slide Cam Pulley allows precise camshaft timing adjustment on \u003cstrong\u003e4A-GE \/ 4A-GZE 16V\u003c\/strong\u003e engines in 1983–1987 Corolla AE86, 1984–1989 MR2 AW11, and 1987–1991 JDM Corolla AE92 coupes and 1988–1991 U.S.-Market Corolla GT-S AE92 coupes. Moving the cam timing forward or backward relative to the crankshaft allows the installed valve timing to be set for factory or aftermarket camshafts, engine machining changes, and performance tuning.\u003c\/p\u003e\n\u003cp\u003eThe pulley uses \u003cstrong\u003elightweight A2014 duralumin\u003c\/strong\u003e construction with a nickel-plated gear section for increased surface hardness and wear resistance. The center adjustment position corresponds to the factory cam-pulley phase, while the graduated scale allows repeatable advance or retard adjustments.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camshaft timing for Toyota \u003cstrong\u003e4A-GE and 4A-GZE\u003c\/strong\u003e engines\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e±20° crank-angle adjustment range\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eApproximately \u003cstrong\u003e2° of crank angle per graduation\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCenter position corresponds to factory cam timing\u003c\/li\u003e\n\u003cli\u003eSuitable for intake or exhaust camshaft use on supported 16-valve applications\u003c\/li\u003e\n\u003cli\u003eLightweight \u003cstrong\u003eA2014 duralumin\u003c\/strong\u003e construction\u003c\/li\u003e\n\u003cli\u003eNickel-plated gear section for increased surface hardness and wear resistance\u003c\/li\u003e\n\u003cli\u003eSuitable for use with standard or reinforced timing belts\u003c\/li\u003e\n\u003cli\u003eOne pulley controls one camshaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Japanese-market Corolla Levin and Sprinter Trueno, 4A-GE \/ 4A-GZE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCamshaft Position:\u003c\/strong\u003e Intake or exhaust on the listed 16-valve engine configurations.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine-swapped vehicles require the compatible 4A-GE \/ 4A-GZE 16V camshaft and timing system\u003c\/strong\u003e; chassis identity alone does not establish fitment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFactory AE86 SR5 4A-C and AE92 SR5 4A-F \/ 4A-FE engines are not covered.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with the intake side of 20-valve 4A-GE engines.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDeveloped for closed-course competition use.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e HKS\u003cbr\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Adjustable Cam Gear \/ Slide Cam Pulley\u003cbr\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Toyota 4A-GE \/ 4A-GZE 16V\u003cbr\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e A2014 Duralumin\u003cbr\u003e\n\u003cstrong\u003eGear Finish:\u003c\/strong\u003e Nickel Plated\u003cbr\u003e\n\u003cstrong\u003eAdjustment Range:\u003c\/strong\u003e ±20° Crank Angle\u003cbr\u003e\n\u003cstrong\u003eGraduation:\u003c\/strong\u003e Approximately 2° Crank Angle per Mark\u003cbr\u003e\n\u003cstrong\u003eCamshaft Position:\u003c\/strong\u003e Intake \/ Exhaust\u003cbr\u003e\n\u003cstrong\u003eTiming Drive:\u003c\/strong\u003e Timing Belt\u003cbr\u003e\n\u003cstrong\u003eValve Train:\u003c\/strong\u003e DOHC\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eSupporting Engine Components\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/preserverad.com\/products\/hks-fine-tune-high-performance-timing-belt-4age-4agze-16v-ae86-aw11-ae92\"\u003e\u003cstrong\u003eHKS Fine Tune Timing Belt\u003c\/strong\u003e\u003c\/a\u003e provides a reinforced belt option for the compatible 4A-GE \/ 4A-GZE 16-valve timing systems.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003eChoose one gear for a single camshaft or a pair for both camshafts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Unit (1 Gear):\u003c\/strong\u003e (1) HKS adjustable cam gear for one camshaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Engine Set - Pair (2 Gears):\u003c\/strong\u003e (2) HKS adjustable cam gears for the intake and exhaust camshafts on the supported 16-valve engine.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HKS","offers":[{"title":"Single Unit (1 Gear)","offer_id":53237916172597,"sku":"541","price":215.0,"currency_code":"USD","in_stock":true},{"title":"Complete Engine Set - Pair (2 Gears)","offer_id":53237916205365,"sku":"542","price":430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/Untitled-3_263abe02-83d0-4bab-b10b-6d62fe67e852.png?v=1790372284"},{"product_id":"arp-4age-head-stud-kit-toyota-ae86-16v","title":"ARP Pro Series 8740 Chromoly Cylinder Head Stud Kit | 4A-GE \/ 4A-GZE (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eARP Pro Series 8740 Chromoly Cylinder Head Stud Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with 4A-GE \/ 4A-GZE 16V engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe ARP Pro Series Cylinder Head Stud Kit is a performance-grade cylinder head fastening upgrade for Toyota \u003cstrong\u003e4A-GE 16-valve and 4A-GZE engines\u003c\/strong\u003e, used in the 1983–1987 JDM Corolla AE86, 1985–1987 U.S.-Market Corolla Sport GT-S, 1984–1989 Toyota MR2 and 1987–1991 JDM Toyota Corolla AE92 coupes and 1988–1991 U.S.-Market Corolla GT-S AE92 coupe applications.\u003c\/p\u003e\n\u003cp\u003eThe kit replaces the factory cylinder-head fasteners with \u003cstrong\u003e8740 chromoly steel studs\u003c\/strong\u003e, 12-point nuts, and hardened parallel-ground washers. The stud design provides a strong, consistent clamping connection between the cylinder head and engine block, making it well suited to engine rebuilds, performance builds, and applications where dependable cylinder-head sealing is important.\u003c\/p\u003e\n\u003cp\u003eThe kit uses ten application-specific studs in three lengths to match the factory 4A-GE cylinder-head mounting locations.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Toyota \u003cstrong\u003e4A-GE DOHC 16V and 4A-GZE engines\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits AE86 models equipped with the 4A-GE \/ 4A-GEU 16-valve engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8740 chromoly steel\u003c\/strong\u003e fastener construction\u003c\/li\u003e\n\u003cli\u003eBlack oxide fastener finish\u003c\/li\u003e\n\u003cli\u003eHeat-treated performance fasteners\u003c\/li\u003e\n\u003cli\u003eThread-rolled stud construction\u003c\/li\u003e\n\u003cli\u003eIncludes \u003cstrong\u003e12-point nuts\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes hardened parallel-ground washers\u003c\/li\u003e\n\u003cli\u003eTen application-specific cylinder head studs\u003c\/li\u003e\n\u003cli\u003eARP Ultra-Torque fastener assembly lubricant included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE \/ 4A-GEU 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE \/ 4A-GEU 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ naturally aspirated 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ naturally aspirated 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno GT-Z (JDM) \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the original 4A-GE DOHC 16-valve or 4A-GZE cylinder head and block. \u003cstrong\u003eNot for 20-valve cylinder-head conversions.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e4A-GE \/ 4A-GEU 16-valve and 4A-GZE engines\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot intended for 4A-GE 20-valve cylinder-head applications\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ARP\u003cbr\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e Pro Series\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cylinder Head Stud Kit\u003cbr\u003e\u003cstrong\u003eEngine:\u003c\/strong\u003e Toyota 4A-GE \/ 4A-GEU DOHC 16V and 4A-GZE\u003cbr\u003e\u003cstrong\u003eFastener Style:\u003c\/strong\u003e Stud\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e 8740 Chromoly Steel\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Oxide\u003cbr\u003e\u003cstrong\u003eNut Style:\u003c\/strong\u003e 12-Point\u003cbr\u003e\u003cstrong\u003eBlock Thread:\u003c\/strong\u003e M10 × 1.25\u003cbr\u003e\u003cstrong\u003eStud Quantity:\u003c\/strong\u003e 10\u003cbr\u003e\u003cstrong\u003eStud Lengths:\u003c\/strong\u003e Five 4.250-inch, four 5.000-inch and one 4.800-inch\u003cbr\u003e\u003cstrong\u003eWashers Included:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eAssembly Lubricant Included:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Cylinder Head-to-Engine Block Fastening\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTen application-specific cylinder head studs\u003c\/li\u003e\n\u003cli\u003e12-point fastening nuts\u003c\/li\u003e\n\u003cli\u003eHardened parallel-ground washers\u003c\/li\u003e\n\u003cli\u003eARP Ultra-Torque fastener assembly lubricant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":53443512402229,"sku":"783","price":158.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/ARP_305e2d55-4053-4682-a8eb-1cf479396f87.png?v=1788307671"},{"product_id":"supertech-4age-valve-spring-titanium-retainer-kit-ae86-aw11-mr2","title":"Supertech Valve Spring Kit | 4A-GE \/ 4A-GZE 16V (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eSupertech Valve Spring Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with 4A-GE \/ 4A-GZE 16V cylinder heads and matching spring, retainer and seat configurations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Supertech Valve Spring Kit pairs performance valve springs with titanium retainers and matching seats for 1983–1987 JDM Corolla AE86, 1985–1987 U.S.-Market Corolla Sport AE86 GT-S, 1984–1989 Toyota MR2 AW11, and 1987–1991 JDM Toyota Corolla AE92 coupes and 1988–1991 U.S.-Market Corolla GT-S AE92 coupe applications with Toyota \u003cstrong\u003e4A-GE and 4A-GZE\u003c\/strong\u003e 16-valve cylinder heads using the \u003cstrong\u003ematching spring, retainer and seat configuration\u003c\/strong\u003e. Two spring-pressure configurations let the parts match the camshaft's required spring loads rather than treating higher pressure as an automatic upgrade.\u003c\/p\u003e\n\u003cp\u003eThe single and dual kits include a full set for sixteen valves. The dual configuration also includes matching valve-stem seals and requires the \u003cstrong\u003ecompatible smaller-diameter valve guides\u003c\/strong\u003e, which are sold separately.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eComplete 16-valve spring and titanium retainer kit\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eDesigned for Toyota \u003cstrong\u003e4A-GE \/ 4A-GZE DOHC 16V\u003c\/strong\u003e cylinder heads\u003c\/li\u003e\n\u003cli\u003eChoice of \u003cstrong\u003e55 lb single-spring\u003c\/strong\u003e or \u003cstrong\u003e73 lb dual-spring\u003c\/strong\u003e configuration\u003c\/li\u003e\n\u003cli\u003eChrome Silicon Vanadium steel spring construction\u003c\/li\u003e\n\u003cli\u003eCNC-machined titanium retainers\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e14.4 mm maximum net valve lift\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e25 mm outer spring diameter\u003c\/li\u003e\n\u003cli\u003e18 mm outer spring inside diameter\u003c\/li\u003e\n\u003cli\u003ePerformance upgrade for higher-RPM and performance-camshaft builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpring Pressure \u0026amp; Lift Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Spring – 55 lb\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeat pressure: \u003cstrong\u003e55 lb @ 35.4 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOpen pressure: \u003cstrong\u003e130 lb @ 10.5 mm lift\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpring rate: \u003cstrong\u003e7.6 lb\/mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum net lift: \u003cstrong\u003e14.4 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCoil bind: \u003cstrong\u003e21 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDual Spring – 73 lb\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeat pressure: \u003cstrong\u003e73 lb @ 35.4 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOpen pressure: \u003cstrong\u003e202 lb @ 10.5 mm lift\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpring rate: \u003cstrong\u003e12.6 lb\/mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum net lift: \u003cstrong\u003e14.4 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCoil bind: \u003cstrong\u003e21 mm outer \/ 17 mm inner\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMatch spring pressure to the camshaft's required installed height and spring loads rather than choosing the higher-pressure configuration automatically.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno GT-Z (JDM) \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequired Configuration:\u003c\/strong\u003e Matching springs, retainers and seats for the 16-valve cylinder head. The dual kit requires the compatible smaller-diameter guide and seal arrangement.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe selected spring pressure and installed height must match the camshaft and cylinder-head configuration.\u003c\/strong\u003e \u003cstrong\u003eMaximum lift alone is not a complete fitment specification.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe dual-spring kit requires compatible smaller-diameter valve guides and its matching seals.\u003c\/strong\u003e \u003cstrong\u003eValve guides are not included.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpring, retainer, seal and valve-guide clearances must be compatible with the selected camshaft lift.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot for factory AE86 SR5 4A-C, AE92 SR5 4A-F \/ 4A-FE, or 4A-GE 20-valve cylinder heads.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Supertech\u003cbr\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Valve Spring \u0026amp; Titanium Retainer Kit\u003cbr\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Toyota 4A-GE \/ 4A-GZE DOHC 16V\u003cbr\u003e\n\u003cstrong\u003eAvailable Designs:\u003c\/strong\u003e Single Spring \/ Dual Spring\u003cbr\u003e\n\u003cstrong\u003eSpring Material:\u003c\/strong\u003e Chrome Silicon Vanadium Steel\u003cbr\u003e\n\u003cstrong\u003eRetainer Material:\u003c\/strong\u003e Titanium\u003cbr\u003e\n\u003cstrong\u003eOuter Spring OD:\u003c\/strong\u003e 25 mm\u003cbr\u003e\n\u003cstrong\u003eOuter Spring ID:\u003c\/strong\u003e 18 mm\u003cbr\u003e\n\u003cstrong\u003eMaximum Net Lift:\u003c\/strong\u003e 14.4 mm\u003cbr\u003e\n\u003cstrong\u003eValve Positions:\u003c\/strong\u003e Intake \u0026amp; Exhaust\u003cbr\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Complete 16-Valve Cylinder Head\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich Valve Spring Kit Should You Choose?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Spring – 55 lb — Best for a rebuild that does not need the dual kit’s extra guide changes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the single kit when its installed-height and spring-load specifications match your camshaft. It provides the springs, titanium retainers and seats without the dual kit's additional guide-and-seal requirement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDual Spring – 73 lb — Best for a build whose camshaft requires the higher spring loads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the dual kit when your camshaft requires its higher seat and open pressures. It includes matching seals, but the compatible smaller-diameter valve guides are a separate requirement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e Match the kit to the camshaft's required spring loads and the cylinder-head configuration. Choose the single kit when its specifications meet the build's needs, or the dual kit when the higher-pressure specification and required guide-and-seal setup are appropriate.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Spring – 55 lb\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(16) Single valve springs\u003c\/li\u003e\n\u003cli\u003e(16) Titanium retainers\u003c\/li\u003e\n\u003cli\u003e(16) Spring seat locators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDual Spring – 73 lb\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(16) Outer valve springs\u003c\/li\u003e\n\u003cli\u003e(16) Inner valve springs\u003c\/li\u003e\n\u003cli\u003e(16) Titanium retainers\u003c\/li\u003e\n\u003cli\u003e(16) Spring seat locators\u003c\/li\u003e\n\u003cli\u003e(16) Matching valve stem seals\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Supertech","offers":[{"title":"Single Spring – 55 lb","offer_id":53510985515317,"sku":"918","price":467.74,"currency_code":"USD","in_stock":true},{"title":"Dual Spring – 73 lb","offer_id":53510985548085,"sku":"919","price":550.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/supertech-4age-16v-valve-spring-titanium-retainer-kit-01_967d2886-298d-45a6-833c-757c64a4fd99.png?v=1794432865"},{"product_id":"arp-4age-connecting-rod-bolt-kit-toyota-ae86","title":"ARP High Performance 8740 Connecting Rod Bolt Kit (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eARP High Performance 8740 Connecting Rod Bolt Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with original connecting rods accepting M9 press-fit bolts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe ARP High Performance Connecting Rod Bolt Kit is a heavy-duty fastener upgrade for 1983–1987 JDM Corolla AE86, 1984–1987 U.S.-Market Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 JDM Toyota Corolla AE92 coupes and 1988–1991 U.S.-Market Corolla AE92 coupes. It fits their supported original 4A-GE, 4A-GZE, 4A-C, 4A-F and 4A-FE connecting rods, not every aftermarket rod sold for those engines.\u003c\/p\u003e\n\u003cp\u003eThe complete eight-bolt set services four connecting rods and includes matching fastening nuts and ARP Ultra-Torque assembly lubricant. Heat-treated 8740 chromoly steel and a large under-head radius provide increased fastener strength for stock rebuilds and performance engine builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnecting-rod machine work is required.\u003c\/strong\u003e The rod’s bolt-hole chamfer must accommodate the fastener’s under-head radius.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance Series connecting rod bolt kit\u003c\/li\u003e\n\u003cli\u003e\nPremium \u003cstrong\u003e8740 chromoly steel\u003c\/strong\u003e construction\n\u003c\/li\u003e\n\u003cli\u003e\nHeat-treated for approximately \u003cstrong\u003e200,000 psi tensile strength\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM9 connecting rod bolt\u003c\/strong\u003e application\n\u003c\/li\u003e\n\u003cli\u003e\nComplete \u003cstrong\u003e8-bolt set\u003c\/strong\u003e for a four-cylinder engine\n\u003c\/li\u003e\n\u003cli\u003e\nFor the original \u003cstrong\u003e4A-GE \/ 4A-GZE \/ 4A-C \/ 4A-F \/ 4A-FE connecting rods\u003c\/strong\u003e listed below\n\u003c\/li\u003e\n\u003cli\u003eLarge under-head radius designed to improve fastener strength\u003c\/li\u003e\n\u003cli\u003eSuitable for stock rebuild and performance engine applications\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eConnecting Rod Fastener Choice\u003c\/h2\u003e\n\u003cp\u003eThese bolts suit rebuilds that retain the supported original-style connecting rods. They are a press-fit fastener upgrade, not a replacement connecting-rod set. Aftermarket rods may use a different bolt design, diameter or fastening arrangement and require their own specified hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnecting-rod machine work is required for this upgrade.\u003c\/strong\u003e A shared bolt does not make different rods, pistons or crankshafts interchangeable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE \/ 4A-GEU 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE \/ 4A-GEU 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1987:\u003c\/strong\u003e SR5 \/ Sport DX (U.S.-Market) \/ 4A-C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ naturally aspirated 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ naturally aspirated 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno GT-Z (JDM) \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e SR5 coupe (U.S.-Market) \/ 4A-F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e SR5 coupe (U.S.-Market) \/ 4A-FE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor the specified factory-style connecting rods accepting M9 press-fit bolts.\u003c\/strong\u003e Engine identity alone does not establish compatibility with aftermarket rods.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnecting-rod resizing is required for this fastener upgrade.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe bolt-hole chamfer must clear the larger under-head radius.\u003c\/strong\u003e Proper connecting-rod machine work is part of this upgrade.\u003c\/li\u003e\n\u003cli\u003eDifferent original rod and crankshaft configurations can share this bolt interface without making those larger components interchangeable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ARP\u003cbr\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e High Performance\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Connecting Rod Bolt Kit\u003cbr\u003e\u003cstrong\u003eEngine Applications:\u003c\/strong\u003e Toyota 4A-GE \/ 4A-GZE \/ 4A-C \/ 4A-F \/ 4A-FE\u003cbr\u003e\u003cstrong\u003eBolt Size:\u003c\/strong\u003e M9\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e 8740 Chromoly Steel\u003cbr\u003e\u003cstrong\u003eTensile Strength:\u003c\/strong\u003e Approximately 200,000 psi\u003cbr\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Press-Fit\u003cbr\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 8 Connecting Rod Bolts\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(8) ARP High Performance 8740 Connecting Rod Bolts\u003c\/li\u003e\n\u003cli\u003e(8) Matching fastening nuts\u003c\/li\u003e\n\u003cli\u003eARP Ultra-Torque fastener assembly lubricant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":53537480802613,"sku":"964","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/ae86-arp-high-performance-8740-connecting-rod-bolt-kit-01.png?v=1792550767"},{"product_id":"arp-4age-main-stud-kit-ae86-aw11","title":"ARP 8740 Chromoly Main Stud Kit | 4A-GE \/ 4A-GZE (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eARP 8740 Chromoly Main Stud Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with 4A-GE \/ 4A-GZE 16V engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARP Main Stud Kit\u003c\/strong\u003e is a high-strength bottom-end fastener upgrade for Toyota 4A-GE DOHC 16-valve and 4A-GZE engines. It covers the 1983–1987 JDM Corolla AE86, 1985–1987 U.S.-Market Corolla Sport GT-S, 1984–1989 Toyota MR2 and 1987–1991 JDM Toyota Corolla AE92 coupes and 1988–1991 U.S.-Market Corolla GT-S AE92 coupe applications. It replaces the factory main-cap bolts with precision-manufactured studs designed to provide more consistent main-bearing-cap clamping during engine assembly.\u003c\/p\u003e\n\u003cp\u003eThe studs are manufactured from \u003cstrong\u003eheat-treated 8740 chromoly steel\u003c\/strong\u003e with a black oxide finish and a tensile-strength rating of 200,000 psi. Hardened washers and high-strength hex nuts are included to complete the main-cap fastening system.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Toyota 4A-GE DOHC 16V and 4A-GZE engines\u003c\/li\u003e\n\u003cli\u003ePerformance replacement for factory main-cap bolts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e8740 chromoly steel construction\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e200,000 psi tensile-strength rating\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHeat-treated fastener construction\u003c\/li\u003e\n\u003cli\u003ePrecision thread-rolled stud design\u003c\/li\u003e\n\u003cli\u003eBlack oxide finish\u003c\/li\u003e\n\u003cli\u003eProvides consistent main-bearing-cap clamping\u003c\/li\u003e\n\u003cli\u003eHelps reduce main-cap movement and fretting wear.\u003c\/li\u003e\n\u003cli\u003eIncludes hardened parallel-ground washers and high-strength nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eMain Stud Design\u003c\/h2\u003e\n\u003cp\u003eThe stud-style fastening system separates block-thread engagement from final clamping torque. The studs, nuts and washers form a complete main-cap fastening system.\u003c\/p\u003e\n\u003cp\u003eThis arrangement reduces the twisting load placed on the fastener during final tightening and helps maintain more consistent clamping across the main-bearing caps. It is well suited to 4A-GE engine rebuilds, naturally aspirated performance builds, and other applications where increased bottom-end fastener strength is desired.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE \/ 4A-GEU 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE \/ 4A-GEU 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ naturally aspirated 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ naturally aspirated 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno GT-Z (JDM) \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the original 4A-GE 16V \/ 4A-GZE two-bolt main-cap configuration. \u003cstrong\u003eNot for windage-tray mounting. Main-bearing bore correction may be required when changing fasteners. Aftermarket caps and reinforcement ladders require their own hardware selection.\u003c\/strong\u003e Engine-swapped vehicles require the supported engine and main-cap arrangement.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFor Toyota 4A-GE DOHC 16-valve and 4A-GZE engines\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003cli\u003eEngine-swapped vehicles require the same supported engine and main-cap interface; chassis identity alone does not establish fitment.\u003c\/li\u003e\n\u003cli\u003eDesigned for a 2-bolt main-cap configuration\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot designed for windage-tray mounting\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ARP\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Engine Main Stud Kit\u003cbr\u003e\u003cstrong\u003eEngine Family:\u003c\/strong\u003e Toyota 4A-GE \/ 4A-GZE\u003cbr\u003e\u003cstrong\u003eEngine Displacement:\u003c\/strong\u003e 1.6L\u003cbr\u003e\u003cstrong\u003eCylinder Head Configuration:\u003c\/strong\u003e DOHC 16V\u003cbr\u003e\u003cstrong\u003eMain Configuration:\u003c\/strong\u003e 2-Bolt Main\u003cbr\u003e\u003cstrong\u003eFastener Style:\u003c\/strong\u003e Stud\u003cbr\u003e\u003cstrong\u003eNut Style:\u003c\/strong\u003e Standard Hex\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e 8740 Chromoly Steel\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Oxide\u003cbr\u003e\u003cstrong\u003eTensile Strength:\u003c\/strong\u003e 200,000 psi\u003cbr\u003e\u003cstrong\u003eWashers Included:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eNuts Included:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eWindage Tray Provision:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Crankshaft Main Bearing Cap Fastening\u003cbr\u003e\u003cstrong\u003eManufacturer Type:\u003c\/strong\u003e Aftermarket Performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eShould You Choose Main Bolts or Main Studs?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eARP Main Stud Kit — Best for a performance build that calls for more consistent main-cap clamping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose studs when your engine-building plan specifies a stud-style fastening system for the original main caps. They are not an automatic upgrade requirement for every street engine, and changing fasteners may require main-bearing bore correction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/arp-main-bearing-cap-bolt-kit-4age-4agze-ae86-aw11-ae92\"\u003eARP Main Bearing Cap Bolt Kit\u003c\/a\u003e — Best for keeping a planned rebuild more affordable when studs are not required\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bolt kit retains the bolt-style arrangement at a lower price point. Neither kit is automatically compatible with aftermarket caps or reinforcement ladders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e Keep sound factory fasteners for a normal rebuild unless the engine-building plan requires an upgrade. Choose bolts for a lower-cost bolt-style upgrade, or these studs when the build specifically calls for their clamping arrangement.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(10) ARP main studs\u003c\/li\u003e\n\u003cli\u003e(10) High-strength hex fastening nuts\u003c\/li\u003e\n\u003cli\u003e(10) Hardened parallel-ground washers\u003c\/li\u003e\n\u003cli\u003eARP Ultra-Torque fastener assembly lubricant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":53537731051829,"sku":"965","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/arp-8740-chromoly-main-stud-kit-01.png?v=1792550767"},{"product_id":"acl-race-main-bearings-toyota-4age-4agze-ae86-aw11","title":"ACL Race Series Standard-Size Main Bearing Set (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eACL Race Series Standard-Size Main Bearing Set\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with standard-size crankshaft main journals.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eACL Race Series Standard-Size Main Bearing Set\u003c\/strong\u003e is a performance engine-bearing set for Toyota 4A-C, 4A-F, 4A-FE, 4A-GE 16V and 4A-GZE engines in 1983–1987 Corolla AE86, 1984–1989 MR2 AW11 and 1987–1991 JDM Corolla AE92 coupes and 1988–1991 U.S.-Market Corolla AE92 coupe applications using standard-diameter crankshaft main journals. The set supports the crankshaft across all five main-journal positions and is intended for performance rebuilds where consistent clearances, bearing retention, and durability at elevated engine speeds are priorities. JDM AE92 coverage is for 4A-GE 16V \/ 4A-GZE; the 4A-F \/ 4A-FE applications are U.S.-Market.\u003c\/p\u003e\n\u003cp\u003eThis set replaces the bearing shells at all five main-journal positions. It is intended for a performance rebuild using a crankshaft that retains standard-size main journals, not one that has been ground to an undersize repair dimension.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis bearing set is for standard-size crankshaft journals only.\u003c\/strong\u003e The actual journal diameter and required assembled oil clearance determine bearing suitability.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eACL Race Series performance main bearing set\u003c\/li\u003e\n\u003cli\u003eFor Toyota 4A-C, 4A-F, 4A-FE, 4A-GE 16V and 4A-GZE engines using standard-size crankshaft main journals\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eComplete set for all five crankshaft main-journal positions\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard-size configuration\u003c\/strong\u003e for standard-diameter crankshaft journals\u003c\/li\u003e\n\u003cli\u003eTri-metal copper-lead bearing construction with nickel barrier layer\u003c\/li\u003e\n\u003cli\u003eHigh-tensile steel backing for bearing support and retention\u003c\/li\u003e\n\u003cli\u003ePrecision-machined wall thickness for consistent assembled clearances\u003c\/li\u003e\n\u003cli\u003eExtended main-bearing grooves support oil delivery to the connecting-rod bearings\u003c\/li\u003e\n\u003cli\u003eIncreased eccentricity helps accommodate housing distortion at elevated engine speeds\u003c\/li\u003e\n\u003cli\u003eEnlarged internal-diameter chamfers accommodate performance crankshaft fillet radii\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eRace Series Bearing Construction\u003c\/h2\u003e\n\u003cp\u003eACL Race Series bearings use a multi-layer construction built for high-load engine applications. The bearing structure uses SAE1010 high-tensile steel backing, a copper-lead-tin lining, a nickel separation layer, and a lead-tin-copper overlay.\u003c\/p\u003e\n\u003cp\u003eThe Race Series design does not use a cosmetic silver tin flash. New bearings can show a dark tarnished appearance that may vary between black, brown, and blue tones; this is normal for the Race Series overlay and does not indicate a used or damaged bearing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1987:\u003c\/strong\u003e SR5 (U.S.-Market) \/ 4A-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ naturally aspirated 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ naturally aspirated 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno coupe (JDM) \/ 4A-GE 16V or 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e SR5 coupe (U.S.-Market, Japan-produced) \/ 4A-F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e SR5 coupe (U.S.-Market) \/ 4A-FE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eStandard-size crankshaft journal application only\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eVerify the installed engine and measured main-bearing interface before ordering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA crankshaft ground undersize requires the corresponding repair-size bearing set.\u003c\/strong\u003e Actual journal dimensions and assembled oil clearance determine the required bearing choice.\u003c\/li\u003e\n\u003cli\u003eThis is a main bearing set; connecting-rod bearings and thrust washers are sold separately. The \u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/acl-standard-thrust-washer-set-ae86-corolla-aw11-mr2\"\u003e\u003cstrong\u003eACL Standard-Thickness Thrust Washer Set\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e is a separate complementary set; thrust thickness must suit the measured crankshaft thrust faces and required end float.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ACL\u003cbr\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e Race Series\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Engine Main Bearing Set\u003cbr\u003e\u003cstrong\u003eBearing Size:\u003c\/strong\u003e Standard (STD)\u003cbr\u003e\u003cstrong\u003eEngine Family:\u003c\/strong\u003e Toyota 4A-C \/ 4A-F \/ 4A-FE \/ 4A-GE 16V \/ 4A-GZE\u003cbr\u003e\u003cstrong\u003eEngine Displacement:\u003c\/strong\u003e 1.6L \/ 1587cc\u003cbr\u003e\u003cstrong\u003eBearing Construction:\u003c\/strong\u003e Tri-Metal\u003cbr\u003e\u003cstrong\u003eLining:\u003c\/strong\u003e Copper-Lead-Tin\u003cbr\u003e\u003cstrong\u003eBarrier Layer:\u003c\/strong\u003e Nickel\u003cbr\u003e\u003cstrong\u003eOverlay:\u003c\/strong\u003e Lead-Tin-Copper\u003cbr\u003e\u003cstrong\u003eSteel Backing:\u003c\/strong\u003e SAE1010 High-Tensile Steel\u003cbr\u003e\u003cstrong\u003eMain Journal Positions:\u003c\/strong\u003e 1–5\u003cbr\u003e\u003cstrong\u003eTunnel Diameter:\u003c\/strong\u003e 52.020–52.050 mm\u003cbr\u003e\u003cstrong\u003eStandard Shaft Diameter:\u003c\/strong\u003e 47.985–48.000 mm\u003cbr\u003e\u003cstrong\u003eMaximum Wall Thickness:\u003c\/strong\u003e 2.001 mm\u003cbr\u003e\u003cstrong\u003eMaximum Bearing Length:\u003c\/strong\u003e 19.90 mm\u003cbr\u003e\u003cstrong\u003eGrade:\u003c\/strong\u003e Performance\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Complete ACL Race Series standard-size main bearing set for all five crankshaft main journals\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL","offers":[{"title":"Default Title","offer_id":53537993949493,"sku":"966","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/acl-race-series-standard-size-main-bearing-set-4age-4agze-01.png?v=1789941138"},{"product_id":"tomei-4ag-main-stud-crank-cap-ladder-kits-ae86-aw11","title":"TOMEI Main Stud \u0026 Crank Cap Ladder Kits | 4A-GE \/ 4A-GZE 16V (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eTOMEI 4AG Main Stud \u0026amp; Crank Cap Ladder Kits\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with 4A-GE \/ 4A-GZE 16V engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eTOMEI 4AG \u003cstrong\u003emain studs\u003c\/strong\u003e and \u003cstrong\u003ecrank-cap ladders\u003c\/strong\u003e reinforce the lower end of Toyota \u003cstrong\u003e4A-GE and 4A-GZE\u003c\/strong\u003e 16V engines in 1983–1987 Corolla AE86, 1984–1989 MR2 AW11, and 1987–1991 JDM Toyota Corolla AE92 coupes and 1988–1991 U.S.-Market Corolla GT-S AE92 coupes. The main studs improve main-cap clamping consistency, while the ladder pieces increase support across the crank-cap area for high-RPM and performance engine builds.\u003c\/p\u003e\n\u003cp\u003eChoose the ladder set for additional cap support, the studs for reinforced clamping, or the complete matched package for both. \u003cstrong\u003eLadders require compatible longer main fasteners, and oil-pan or baffle modification may be necessary.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Toyota \u003cstrong\u003e4A-GE \/ 4A-GZE 16V\u003c\/strong\u003e bottom-end reinforcement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8740 chromoly\u003c\/strong\u003e main-stud construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM10 × P1.25\u003c\/strong\u003e main-stud thread specification\u003c\/li\u003e\n\u003cli\u003eTen main studs, ten nuts, and ten washers in main-stud-equipped configurations\u003c\/li\u003e\n\u003cli\u003eFive special heat-treated crank-cap ladders in ladder-equipped configurations\u003c\/li\u003e\n\u003cli\u003eSupports more consistent main-cap clamping and increased crank-cap rigidity\u003c\/li\u003e\n\u003cli\u003eAvailable as ladder-only, main-stud-only, or complete matched configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBottom-End Reinforcement\u003c\/h2\u003e\n\u003cp\u003eHigh engine speed and increased cylinder load place additional stress on the crankshaft, main bearings, main caps, and fasteners. The stud-style fastener system provides a more consistent clamping arrangement at the main caps, while the ladder system adds structural support across the crank-cap area to help control deflection under demanding engine operation.\u003c\/p\u003e\n\u003cp\u003eThe complete configuration combines both upgrades for builds where main-cap clamping and crank-cap rigidity are being addressed together.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno GT-Z (JDM) \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCrank-cap ladders require longer main fasteners with adequate engagement. \u003cstrong\u003eFactory main-cap bolts are not compatible with the ladders.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLadder-equipped configurations require sufficient No. 5 ladder clearance at the oil pan and baffle\u003c\/strong\u003e; these components may need modification.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe main-stud clamping arrangement requires bearing clearances suited to the reinforced fasteners.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory AE86 SR5 4A-C and AE92 SR5 4A-F \/ 4A-FE engines are not covered.\u003c\/strong\u003e \u003cstrong\u003eEngine-swapped vehicles require the compatible 4A-GE \/ 4A-GZE 16V configuration.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIntended for off-road competition use.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e TOMEI\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bottom-End Reinforcement\u003cbr\u003e\u003cstrong\u003eEngine Family:\u003c\/strong\u003e Toyota 4AG 16V\u003cbr\u003e\u003cstrong\u003eMain Stud Material:\u003c\/strong\u003e 8740 Chromoly\u003cbr\u003e\u003cstrong\u003eMain Stud Thread:\u003c\/strong\u003e M10 × P1.25\u003cbr\u003e\u003cstrong\u003eMain Stud Quantity:\u003c\/strong\u003e 10 in stud-equipped configurations\u003cbr\u003e\u003cstrong\u003eCrank Cap Ladder Quantity:\u003c\/strong\u003e 5 in ladder-equipped configurations\u003cbr\u003e\u003cstrong\u003eLadder Construction:\u003c\/strong\u003e Special Heat-Treated Cast Iron (FC)\u003cbr\u003e\u003cstrong\u003ePrimary Purpose:\u003c\/strong\u003e Main-Cap Clamping \u0026amp; Crank-Cap Reinforcement\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich Configuration Should You Choose?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCrank Cap Ladder Set – 5 Ladders — Best for adding cap support to a build with compatible main studs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the ladders when your engine already has suitable longer main fasteners and you want additional crank-cap support. \u003cstrong\u003eFactory main bolts are not compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain Stud Set — Best for improving main-cap clamping without adding ladders\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the stud set when your build calls for reinforced main fasteners but not the ladder system. It includes ten studs with their nuts and washers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Main Stud + Crank Cap Ladder Set — Best for addressing clamping and cap support together\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the complete set when you need both upgrades and want the matched TOMEI components in one configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/arp-4age-main-stud-kit-ae86-aw11\"\u003e\u003cstrong\u003eARP 8740 Chromoly Main Stud Kit\u003c\/strong\u003e\u003c\/a\u003e — Best for a studs-only build using ARP fasteners\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the ARP alternative when your compatible 4A-GE 16V build calls for ARP main studs without crank-cap ladders. This is not a claim that the ARP kit is compatible with TOMEI ladders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e Choose the complete TOMEI set when both upgrades are needed, ladders alone when compatible studs are already part of the build, or a studs-only option when added ladder support is unnecessary.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCrank Cap Ladder Set – 5 Ladders\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(5) TOMEI crank-cap ladders\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMain studs are not included.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMain Stud Set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(10) 8740 chromoly main studs\u003c\/li\u003e\n\u003cli\u003e(10) 12-point fastening nuts\u003c\/li\u003e\n\u003cli\u003e(10) washers\u003c\/li\u003e\n\u003cli\u003e(4) 6-point assembly nuts\u003c\/li\u003e\n\u003cli\u003e(1) ARP molybdenum assembly lubricant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Main Stud + Crank Cap Ladder Set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(5) crank-cap ladders\u003c\/li\u003e\n\u003cli\u003e(10) main studs\u003c\/li\u003e\n\u003cli\u003e(10) 12-point fastening nuts\u003c\/li\u003e\n\u003cli\u003e(10) washers\u003c\/li\u003e\n\u003cli\u003e(4) 6-point assembly nuts\u003c\/li\u003e\n\u003cli\u003e(1) ARP molybdenum assembly lubricant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TOMEI","offers":[{"title":"Crank Cap Ladder Set – 5 Ladders","offer_id":53605724815669,"sku":"1062","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Main Stud Set","offer_id":53605724848437,"sku":"1063","price":270.0,"currency_code":"USD","in_stock":true},{"title":"Complete Main Stud + Crank Cap Ladder Set","offer_id":53596597125429,"sku":"1064","price":520.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/tomei-4ag-complete-main-stud-crank-cap-ladder-set-ae86-aw11.png?v=1791255981"},{"product_id":"tomei-adjustable-cam-gear-4a-ge-4a-gze-16v-ae86-aw11-ae92","title":"TOMEI Adjustable Cam Gear | 4A-GE \/ 4A-GZE 16V (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eTOMEI Adjustable Cam Gear\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with 4A-GE \/ 4A-GZE 16V camshaft and timing-belt systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTOMEI Adjustable Cam Gear\u003c\/strong\u003e provides precise valve-timing adjustment for \u003cstrong\u003e4A-GE \/ 4A-GZE 16V\u003c\/strong\u003e engines in 1983–1987 Corolla AE86, 1984–1989 MR2 AW11, and 1987–1991 JDM Corolla AE92 coupes and 1988–1991 U.S.-Market Corolla GT-S AE92 coupes. The pulley and gear use duralumin construction to reduce rotating mass while retaining the strength required for performance engine builds.\u003c\/p\u003e\n\u003cp\u003eThe gear uses a slide-type adjustment mechanism and is common to the intake and exhaust camshaft positions. Each gear weighs approximately 250 g.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlide-type adjustable cam gear\u003c\/strong\u003e for fine valve-timing setup\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDuralumin pulley and gear construction\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApproximate component weight: 250 g\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCommon intake \/ exhaust application\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e±10° cam-gear adjustment range\u003c\/strong\u003e with up to ±20° equivalent crank-angle timing adjustment\u003c\/li\u003e\n\u003cli\u003eEngraved adjustment scale for repeatable setup\u003c\/li\u003e\n\u003cli\u003eAvailable as a single gear or complete pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eCam Timing Adjustment\u003c\/h2\u003e\n\u003cp\u003eThe slide adjustment changes camshaft phase relative to the crankshaft. The effect on engine response depends on the camshaft and engine combination; the gear does not provide a guaranteed power increase.\u003c\/p\u003e\n\u003cp\u003eThe compatible \u003ca href=\"https:\/\/preserverad.com\/products\/hks-fine-tune-high-performance-timing-belt-4age-4agze-16v-ae86-aw11-ae92\"\u003e\u003cstrong\u003eHKS Fine Tune Timing Belt\u003c\/strong\u003e\u003c\/a\u003e is available separately for a reinforced 16-valve timing-belt setup.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Japanese-market Corolla Levin and Sprinter Trueno, 4A-GE \/ 4A-GZE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCamshaft Position:\u003c\/strong\u003e Intake or exhaust on the listed 16-valve engine configurations.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine-swapped vehicles require the compatible 4A-GE \/ 4A-GZE 16V camshaft and timing system\u003c\/strong\u003e; chassis identity alone does not establish fitment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFactory AE86 SR5 4A-C and AE92 SR5 4A-F \/ 4A-FE engines are not covered.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFor the listed 16-valve applications, not a complete 20-valve cam-gear setup.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIntended for off-road competition use.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e TOMEI\u003cbr\u003e\u003cstrong\u003eEngine:\u003c\/strong\u003e 4A-GE \/ 4A-GZE 16V\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Slide-Type Adjustable Cam Gear\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Duralumin\u003cbr\u003e\u003cstrong\u003eComponent Weight:\u003c\/strong\u003e Approx. 250 g\u003cbr\u003e\u003cstrong\u003eAdjustment Range:\u003c\/strong\u003e ±10° Cam Gear \/ ±20° Crank Angle\u003cbr\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Intake \/ Exhaust\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003eChoose one gear for a single camshaft or a pair for both camshafts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Unit (1 Gear):\u003c\/strong\u003e (1) TOMEI adjustable cam gear for one camshaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Engine Set (Pair):\u003c\/strong\u003e (2) TOMEI adjustable cam gears for the intake and exhaust camshafts on the supported 16-valve engine.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TOMEI","offers":[{"title":"Single Unit (1 Gear)","offer_id":53596597158197,"sku":"1065","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Complete Engine Set (Pair)","offer_id":53597893722421,"sku":"1066","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/tomei-adjustable-cam-gear-4a-ge-4a-gze-16v-ae86-corolla-aw11-mr2-ae92-corolla-01.png?v=1790384870"},{"product_id":"king-xp-rod-bearings-42mm-4age-4agze-aw11","title":"King XP pMaxBlack Rod Bearing Set | 42 mm (1986-89 MR2 \/ 1987-91 Corolla)","description":"\u003ch2\u003eKing XP pMaxBlack Connecting Rod Bearing Set\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1986–1989 Toyota MR2 AW11 and 1987–1991 Toyota Corolla AE92 coupe equipped with 4A-GE \/ 4A-GZE engines using the 42 mm crankpin \/ 45 mm rod-housing interface.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKing XP pMaxBlack Connecting Rod Bearing Set\u003c\/strong\u003e is a performance bearing set for the \u003cstrong\u003e4A-GE \/ 4A-GZE 42 mm crankpin \/ 45 mm connecting-rod housing family\u003c\/strong\u003e. Applications include 1987–1989 JDM and 1988–1989 U.S.-Market naturally aspirated Toyota MR2 AW11, 1986–1989 JDM and 1988–1989 U.S.-Market supercharged MR2 AW11, 1987–1991 JDM Toyota Corolla AE92 coupes, and the 1988–1991 U.S.-Market Toyota Corolla AE92 GT-S. The 1987 JDM naturally aspirated transition requires the later 42\/45 mm assembly; the year alone does not establish fitment. Its copper-lead tri-metal construction and hardened pMaxBlack overlay are designed for demanding, high-load engine use.\u003c\/p\u003e\n\u003cp\u003eEach set contains \u003cstrong\u003efour matching bearing pairs (eight shells)\u003c\/strong\u003e, covering all four connecting rods. Five bearing-size choices accommodate standard-diameter crankpins, measured clearance requirements, and properly reground crankpins. The correct option depends on the actual crankshaft and rod dimensions, not on the vehicle year alone.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKing XP copper-lead tri-metal bearings\u003c\/strong\u003e designed for performance engine builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epMaxBlack hardened overlay\u003c\/strong\u003e for high-load bearing service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadiaLock crush-height design\u003c\/strong\u003e supports bearing retention and heat transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEccentriX bearing geometry\u003c\/strong\u003e supports hydrodynamic lubrication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive bearing-size options\u003c\/strong\u003e for nominal crankpins and two crankshaft undersizes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eChoosing the Correct Bearing Size\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eStandard clearance\u003c\/strong\u003e is for a nominal-size crankshaft. \u003cstrong\u003e0.001 in extra clearance\u003c\/strong\u003e and \u003cstrong\u003e0.001 in reduced clearance\u003c\/strong\u003e provide approximately that change in assembled diametral oil clearance on the same nominal crankshaft. \u003cstrong\u003e0.25 mm\u003c\/strong\u003e and \u003cstrong\u003e0.50 mm crank undersize\u003c\/strong\u003e are for correspondingly reground crankpins, not extra-clearance choices.\u003c\/p\u003e\n\u003cp\u003eThe correct size depends on the finished crankshaft journal, rod housing and required assembled oil clearance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003eEvery application requires the original-style \u003cstrong\u003e42 mm crankpin \/ 45 mm rod-housing bearing interface\u003c\/strong\u003e, with the correctly selected size and matching bearing geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e JDM \/ naturally aspirated 4A-GE with the later 42\/45 mm assembly introduced at the September 1987 production change. \u003cstrong\u003eSeptember transition builds require actual crank\/rod identification; the month alone does not establish fitment.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market \/ naturally aspirated 4A-GE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno GT-Z (JDM) \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not fit original 40 mm crankpin \/ 43 mm rod-housing assemblies, including original AE86 4A-GE configurations, early AW11 configurations, and 4A-C, 4A-F and 4A-FE configurations.\u003c\/strong\u003e A shared 4A-GE engine name does not establish interchangeability between the two bearing families.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance and journal size determine the correct option.\u003c\/strong\u003e \u003cstrong\u003eToyota numbered factory bearing grades do not map directly to these King clearance choices.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.25 mm and 0.50 mm undersize bearings\u003c\/strong\u003e are for correspondingly reground crankshaft journals; they are not a solution for an oversized connecting-rod housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModified engines and aftermarket connecting rods\u003c\/strong\u003e require matching bearing seats, locating tabs, oil-hole position, bearing width, crankshaft fillet clearance and assembled oil clearance. Nominal journal diameter alone does not establish fit.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e King Engine Bearings\u003cbr\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e XP \/ pMaxBlack\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Connecting-Rod Bearing Set\u003cbr\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Connecting-Rod Big End\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Copper-Lead Tri-Metal\u003cbr\u003e\u003cstrong\u003eOverlay:\u003c\/strong\u003e Hardened pMaxBlack\u003cbr\u003e\u003cstrong\u003eEngine Family:\u003c\/strong\u003e Toyota 4A-GE \/ 4A-GZE\u003cbr\u003e\u003cstrong\u003eBearing Family:\u003c\/strong\u003e Nominal 42 mm Crankpin \/ 45 mm Rod Housing\u003cbr\u003e\u003cstrong\u003eSet Quantity:\u003c\/strong\u003e Four Pairs \/ Eight Bearing Shells\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eRod Bearings and Main Bearings\u003c\/h2\u003e\n\u003cp\u003eRod bearings support the connecting rods on the crankpins. The separate \u003ca href=\"https:\/\/preserverad.com\/products\/acl-race-main-bearings-toyota-4age-4agze-ae86-aw11\"\u003e\u003cstrong\u003eACL Race Series standard-size main bearings\u003c\/strong\u003e\u003c\/a\u003e support the crankshaft in a standard-size main-journal assembly. Rod-bearing clearance or undersize does not determine the required main-bearing size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003eEvery option includes \u003cstrong\u003e(4) matched pairs of connecting-rod bearings (8 shells total)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing Size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal crank — Standard clearance\u003c\/li\u003e\n\u003cli\u003eNominal crank — 0.001 in extra clearance\u003c\/li\u003e\n\u003cli\u003eNominal crank — 0.001 in reduced clearance\u003c\/li\u003e\n\u003cli\u003e0.25 mm crank undersize\u003c\/li\u003e\n\u003cli\u003e0.50 mm crank undersize\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Main bearings, thrust washers, connecting rods, crankshaft, rod bolts and gaskets.\u003c\/p\u003e","brand":"King Engine Bearings","offers":[{"title":"Nominal crank — Standard clearance","offer_id":67660675645749,"sku":"1444","price":74.95,"currency_code":"USD","in_stock":true},{"title":"Nominal crank — 0.001 in extra clearance","offer_id":67660675678517,"sku":"1445","price":79.95,"currency_code":"USD","in_stock":true},{"title":"Nominal crank — 0.001 in reduced clearance","offer_id":67660675711285,"sku":"1446","price":79.95,"currency_code":"USD","in_stock":true},{"title":"0.25 mm crank undersize","offer_id":67660675744053,"sku":"1447","price":79.95,"currency_code":"USD","in_stock":true},{"title":"0.50 mm crank undersize","offer_id":67660675776821,"sku":"1448","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/aw11-king-xp-rod-bearing-set-01.png?v=1792551010"},{"product_id":"acl-standard-thrust-washer-set-ae86-corolla-aw11-mr2","title":"ACL Standard-Thickness Thrust Washer Set (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eACL Standard-Thickness Crankshaft Thrust Washer Set\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with the standard-thickness crankshaft thrust-washer configuration.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis ACL thrust washer set controls \u003cstrong\u003eaxial crankshaft movement\u003c\/strong\u003e, the forward-and-backward movement of the crankshaft, in Toyota 4A-C, 4A-F, 4A-FE, 4A-GE 16V and 4A-GZE engines used in 1983–1987 Corolla AE86, 1984–1989 MR2 AW11, and 1987–1991 Corolla AE92 coupe applications. The separate half-washer design serves the crankshaft thrust faces at the center main-bearing position. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard thrust thickness must suit the measured crankshaft thrust faces and required assembled end float, the measured forward-and-backward clearance.\u003c\/strong\u003e Vehicle identity alone does not establish the correct repair thickness for a worn, machined or modified engine.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel-backed aluminum-tin\u003c\/strong\u003e bearing construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper and lower halves\u003c\/strong\u003e for both crankshaft thrust faces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard-thickness configuration\u003c\/strong\u003e for engines retaining the corresponding thrust dimensions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate axial-load components\u003c\/strong\u003e, distinct from radial main and connecting-rod bearings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1987:\u003c\/strong\u003e SR5 (U.S.-Market) \/ 4A-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ naturally aspirated 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ naturally aspirated 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno coupe (JDM) \/ 4A-GE 16V or 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e SR5 coupe (U.S.-Market, Japan-produced) \/ 4A-F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e SR5 coupe (U.S.-Market) \/ 4A-FE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot an oversize thrust set.\u003c\/strong\u003e Engines requiring a different thrust thickness or crankshaft thrust-face repair need a different repair configuration.\u003c\/li\u003e\n\u003cli\u003eMain-journal and connecting-rod bearing sizes do not determine thrust-washer thickness.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFor engine-swapped vehicles, the installed engine and its measured thrust condition determine suitability rather than the chassis badge.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFor 4A-GE \/ 4A-GZE builds requiring standard-diameter radial main bearings, the \u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/acl-race-main-bearings-toyota-4age-4agze-ae86-aw11\"\u003e\u003cstrong\u003eACL Race Series Standard-Size Main Bearing Set\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e supports the five main journals. It is a separate complementary set with its own journal-size requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ACL\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Crankshaft Thrust Washer Set\u003cbr\u003e\u003cstrong\u003eThrust Position:\u003c\/strong\u003e Front and rear faces at No. 3 main bearing\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e Standard; \u003cstrong\u003e2.49 mm maximum axial thickness\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Steel-backed aluminum-tin\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e(2) Upper thrust-washer halves\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e(2) Lower thrust-washer halves\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOne four-piece set. \u003cstrong\u003eRadial main bearings and connecting-rod bearings are not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"ACL","offers":[{"title":"Default Title","offer_id":67661137281333,"sku":"1455","price":9.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/acl-standard-thickness-thrust-washer-set-01.png?v=1792551010"},{"product_id":"mahle-valve-cover-gasket-set-4age-ae86-aw11-ae92","title":"MAHLE Original Valve Cover Gasket Set | 4A-GE (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eMAHLE Original Valve Cover Gasket Set\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1984–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1989 production Toyota Corolla AE92 coupe equipped with 4A-GE 16V engines and the matching original early-pattern one-piece center-cover arrangement.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis molded-rubber set supplies \u003cstrong\u003etwo perimeter gaskets, eight sealing washers, and one center-cover seal\u003c\/strong\u003e for the supported original 4A-GE 16V cover arrangements: May 1984–April 1987 Japanese AE86 \/ 1985–1987 U.S. AE86 GT-S, 1984–1989 Japanese \/ 1985–1989 U.S. naturally aspirated AW11, and May 1987–May 1989 Japanese \/ August 1987–August 1989 U.S. AE92 coupe production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the included center seal fit my engine?\u003c\/strong\u003e The set fits only the matching one-piece-center Japanese AE86, U.S. AE86 GT-S, naturally aspirated AW11, and AE92 with the original early center cover. \u003cstrong\u003eAll 11 supplied pieces fit those listed arrangements.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot for segmented-center Japanese AE86, supercharged 4A-GZE, or later-center AE92 4A-GE.\u003c\/strong\u003e Check the production breaks and overlapping change months below before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaired perimeter gaskets\u003c\/strong\u003e cover both camshaft covers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight sealing washers\u003c\/strong\u003e provide the full cover-fastener sealing quantity for one engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-piece center-cover seal\u003c\/strong\u003e serves the matching naturally aspirated cover arrangement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolded-rubber construction\u003c\/strong\u003e retains the shaped sealing profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMay 1984–April 1987 production:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE 16V; original one-piece center-cover arrangement only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMay 1984–April 1987 production:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE 16V; original one-piece center-cover arrangement only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ naturally aspirated 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ naturally aspirated 4A-GE 16V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAugust 1987–August 1989 production:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V; original early center-cover arrangement only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMay 1987–May 1989 production:\u003c\/strong\u003e Sprinter Trueno \/ Corolla Levin coupe (JDM) \/ 4A-GE 16V; original early center-cover arrangement only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJapanese AE86 May 1984 changeover:\u003c\/strong\u003e this production month includes both segmented and one-piece center-cover arrangements. Only the matching one-piece arrangement is supported; the earlier four-piece front\/rear center-seal arrangement is excluded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAW11 MR2:\u003c\/strong\u003e naturally aspirated 4A-GE only. Supercharged 4A-GZE center covers use a different seal and are excluded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAE92 early center cover:\u003c\/strong\u003e supported only with the original early arrangement in May 1987–May 1989 Japanese production or August 1987–August 1989 U.S.-market production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAE92 overlap months:\u003c\/strong\u003e May 1989 Japanese production and August 1989 U.S.-market production include both early and later center-cover arrangements. The actual original cover and gasket profile determine fitment; build month alone is not enough at these transitions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLater AE92 center covers are excluded:\u003c\/strong\u003e these occur in May 1989–June 1991 Japanese production and August 1989–June 1991 U.S.-market production. Their different one-piece center seal is not interchangeable with the included early seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not fit as a complete supplied set: 4A-GZE, 4A-C, 3A, 4A-F \/ 4A-FE, or 20-valve 4A-GE cover assemblies.\u003c\/strong\u003e Fitment requires original factory engines and cover assemblies; swaps and replacement or aftermarket covers require separate verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCamshaft plugs, spark-plug tube seals, and the PCV-valve grommet are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack FIPG sealant is also required for the cover-sealing job and is not included.\u003c\/strong\u003e \u003ca href=\"https:\/\/preserverad.com\/products\/aisin-black-fipg-gasket-sealant-3oz\"\u003e\u003cstrong\u003eAISIN Black FIPG Gasket Sealant\u003c\/strong\u003e\u003c\/a\u003e is sold separately.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e MAHLE Original\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Valve cover gasket set\u003cbr\u003e\u003cstrong\u003eSealing Material:\u003c\/strong\u003e Molded rubber\u003cbr\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Camshaft-cover perimeter, cover fasteners, and matching naturally aspirated center cover\u003cbr\u003e\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e One 11-piece manufacturer's set\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e(2)\u003c\/strong\u003e Valve-cover perimeter gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e(8)\u003c\/strong\u003e Cover-bolt sealing washers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e(1)\u003c\/strong\u003e Naturally aspirated one-piece center-cover seal\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"MAHLE Original","offers":[{"title":"Default Title","offer_id":67665943200053,"sku":"1682","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/AutomotiveGasketSetonWhite.png?v=1792772574"},{"product_id":"arp-main-bearing-cap-bolt-kit-4age-4agze-ae86-aw11-ae92","title":"ARP Main Bearing Cap Bolt Kit | 4A-GE \/ 4A-GZE (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eARP Main Bearing Cap Bolt Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with 4A-GE \/ 4A-GZE 16V engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis ARP main bearing cap bolt kit is an alternative to a stud conversion for a planned 4A-GE or 4A-GZE engine build. It supplies the bolts that secure the crankshaft's main bearing caps, with washers and ARP Ultra-Torque assembly lubricant.\u003c\/p\u003e\n\u003cp\u003eApplications include 1983–1987 AE86 Corolla in Japan and 1985–1987 AE86 Corolla GT-S in the U.S.; 1984–1989 AW11 MR2 in Japan and 1985–1989 AW11 MR2 in the U.S.; and 1987–1991 Corolla AE92 coupes in Japan and 1988–1991 AE92 Corolla GT-S coupes in the U.S. Engine and supercharged-model year restrictions apply.\u003c\/p\u003e\n\u003cp\u003eIt is intended for engine-building work with factory-style main caps, not routine bolt-on maintenance. Changing main fasteners can affect main-bearing bore dimensions, so additional machine work may be necessary.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen main-cap bolts\u003c\/strong\u003e for one engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM10 x 1.25 threads\u003c\/strong\u003e for the supported Toyota 4A-GE \/ 4A-GZE applications.\u003c\/li\u003e\n\u003cli\u003eWashers and ARP Ultra-Torque assembly lubricant included.\u003c\/li\u003e\n\u003cli\u003eA lower-cost alternative to main studs when the build does not require the stud configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ naturally aspirated 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ naturally aspirated 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Trueno \/ Levin GT or GT APEX (JDM) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e Trueno \/ Levin GTV (JDM) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Trueno \/ Levin GT-Z (JDM) \/ 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor the specified 4A-GE and 4A-GZE engines with factory-style main bearing caps.\u003c\/strong\u003e The listed chassis years do not cover every engine offered in those vehicles.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFactory AE86 SR5 models with 4A-C engines are outside this application.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eThe kit also supports 4A-GE 20V engines. \u003cstrong\u003eEngine-swapped cars must be matched by their actual engine and main-cap arrangement, not chassis year alone.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAftermarket main caps, reinforcement caps and girdles require their own hardware selection; compatibility is not automatic.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain-bearing bore inspection and possible align-honing are part of the engine-build considerations when changing main fasteners.\u003c\/strong\u003e This kit is not a guarantee of a machining-free rebuild.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e ARP\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Main bearing cap bolt kit\u003cbr\u003e\u003cstrong\u003eEngine Application:\u003c\/strong\u003e 4A-GE 16V \/ 20V and 4A-GZE\u003cbr\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e M10 x 1.25\u003cbr\u003e\u003cstrong\u003eFastener Quantity:\u003c\/strong\u003e 10 bolts\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eShould You Choose Main Bolts or Main Studs?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eARP Main Bolts — Best for Keeping a Planned Performance Rebuild More Affordable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the bolt kit if your engine build calls for upgraded main fasteners but does not require studs or reinforcement-cap hardware. It costs less than the stud kit while retaining a bolt-style arrangement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/arp-4age-main-stud-kit-ae86-aw11\"\u003e\u003cstrong\u003eARP Main Stud Kit\u003c\/strong\u003e\u003c\/a\u003e — Best for High-Load 4A-GE \/ 4A-GZE Builds\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the stud kit for a 4A-GE \/ 4A-GZE build facing extreme engine loads, where more consistent clamping is the priority. Check the linked kit's application and any reinforcement-cap requirements rather than treating bolts and studs as interchangeable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e Do not replace sound factory main bolts solely for normal naturally aspirated street use. For a planned performance build, choose bolts when cost matters and studs are not required; choose studs when the engine's load or reinforcement hardware calls for them.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(10) main bearing cap bolts.\u003c\/li\u003e\n\u003cli\u003eWashers.\u003c\/li\u003e\n\u003cli\u003eARP Ultra-Torque assembly lubricant.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":67742400184629,"sku":"1466","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/arp-main-bearing-cap-bolt-kit-01.png?v=1792551115"},{"product_id":"fel-pro-rear-main-seal-kit-corolla-ae86-mr2-aw11-ae92","title":"Fel-Pro Rear Main Seal Kit (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eFel-Pro Rear Main Seal Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis Fel-Pro kit serves U.S.-Market and Japanese AE86 Corolla (1983–1987), AW11 MR2 (1984–1989) and AE92 Corolla \/ Sprinter coupes (1987–1991) with the original \u003cstrong\u003e4A-C, 4A-F, 4A-FE or 16-valve 4A-GE \/ 4A-GZE\u003c\/strong\u003e engine configurations. These combined year spans do not cover every trim or every year in both markets.\u003c\/p\u003e\n\u003cp\u003eIt renews the \u003cstrong\u003erear crankshaft oil seal\u003c\/strong\u003e at the flywheel or automatic-transmission flexplate end of the engine. The package contains \u003cstrong\u003eone one-piece rubber seal and two alternative retainer gaskets\u003c\/strong\u003e, without a replacement seal housing or crankshaft repair sleeve.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear crankshaft position:\u003c\/strong\u003e addresses the engine oil-sealing point at the flywheel or flexplate end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-piece rubber seal:\u003c\/strong\u003e a direct replacement for the original rear seal in the stated factory applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetainer gaskets supplied:\u003c\/strong\u003e alternative gasket shapes are included with the seal, rather than sold as separate kit choices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1987:\u003c\/strong\u003e SR5 \/ Sport DLX (U.S.-Market) \/ 4A-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Trueno \/ Levin (JDM) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Trueno \/ Levin GT-Z (JDM) \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE 16V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e SR5 coupe (U.S.-Market) \/ 4A-F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e SR5 coupe (U.S.-Market) \/ 4A-FE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory engine applications:\u003c\/strong\u003e 4A-GE coverage is for \u003cstrong\u003e16-valve engines\u003c\/strong\u003e; the chassis-year fitment does not identify a swapped engine or modified seal housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternative gaskets:\u003c\/strong\u003e the two supplied retainer gaskets are alternatives, not a two-gasket stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear seal service only:\u003c\/strong\u003e front crankshaft seals, camshaft seals, a replacement retainer housing and a crankshaft repair sleeve are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Fel-Pro\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rear Main Seal Kit\u003cbr\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear Crankshaft\u003cbr\u003e\u003cstrong\u003eSeal Construction:\u003c\/strong\u003e One-Piece\u003cbr\u003e\u003cstrong\u003eSeal Material:\u003c\/strong\u003e Rubber\u003cbr\u003e\u003cstrong\u003eService Quantity:\u003c\/strong\u003e One Kit per Engine\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eRear Seal and Clutch Service\u003c\/h2\u003e\n\u003cp\u003eA rear main seal and a clutch kit address different components. For a 1985–1987 U.S. Corolla GT-S AE86 with its original 4A-GE, T50 manual transmission and 200 mm clutch, the \u003ca href=\"https:\/\/preserverad.com\/products\/exedy-oe-clutch-kit-1985-1987-toyota-corolla-gts-ae86-4age\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eEXEDY OE Replacement Clutch Kit\u003c\/strong\u003e\u003c\/a\u003e is a separate clutch-service option.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e(1) Rear crankshaft oil seal\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e(2) Alternative engine rear oil-seal retainer gaskets\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fel-Pro","offers":[{"title":"Default Title","offer_id":67759660695861,"sku":"1489","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/fel-pro-rear-main-seal-kit-01.png?v=1792551115"},{"product_id":"acl-race-rod-bearings-42mm-4age-4agze-aw11-ae92","title":"ACL Race Series Rod Bearing Set | 42 mm 4A-GE \/ 4A-GZE (1986-89 MR2 \/ 1987-91 Corolla)","description":"\u003ch2\u003eACL Race Series Rod Bearing Set\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1986–1989 Toyota MR2 AW11 and 1987–1991 Toyota Corolla AE92 coupe equipped with 4A-GE \/ 4A-GZE engines using the 42 mm crankpin \/ 45 mm rod-housing interface.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eACL Race Series rod bearings are a performance-oriented option for a carefully measured 4A-GE or 4A-GZE rebuild. Their tri-metal construction combines hardened steel backing, a copper-based lining and a lead-tin-copper overlay. Standard, extra-clearance, reduced-clearance and crank-undersize choices let the engine builder match the bearings to the actual crankshaft and connecting rods, rather than choosing by model year alone.\u003c\/p\u003e\n\u003cp\u003eJapan-market coverage includes 1986–1989 Supercharged MR2 and 1987–1989 naturally aspirated MR2 with the later 42\/45 mm assembly; U.S.-Market MR2 coverage is 1988–1989. Japan-market coverage also includes 1987–1991 Corolla AE92 coupes with 4A-GE and 4A-GZE engines; U.S.-Market Corolla GT-S coupe coverage is 1988–1991. The engine family and measured bearing interface remain essential restrictions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace Series construction:\u003c\/strong\u003e Hardened steel backs, a copper-lead-tin lining, nickel barrier and lead-tin-copper overlay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built bearing geometry:\u003c\/strong\u003e Increased crush and eccentricity, with tightly controlled wall thickness, for performance engine applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasured-clearance choices:\u003c\/strong\u003e Three nominal-standard crank options and two crank-undersize options, without confusing extra clearance with a reground crankshaft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eChoosing the Correct Bearing Size\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eStandard clearance\u003c\/strong\u003e is the reference choice. \u003cstrong\u003e0.001 in extra clearance\u003c\/strong\u003e provides approximately 0.001 in (0.025 mm) more diametral clearance than the standard version on the same journal. \u003cstrong\u003e0.025 mm reduced clearance\u003c\/strong\u003e provides approximately 0.025 mm (0.001 in) less clearance than the standard version on the same journal. These are selection differences, not guaranteed finished oil-clearance values.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0.25 mm crank undersize\u003c\/strong\u003e and \u003cstrong\u003e0.50 mm crank undersize\u003c\/strong\u003e are for the corresponding reground crankpin family. They are not extra-clearance options for an unground standard crank and do not repair an oversized rod housing. The correct choice depends on the finished crankpin diameter, rod housing, bearing geometry and measured assembled oil clearance. Do not substitute one size for another.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003eEvery application below requires the \u003cstrong\u003eoriginal-style 42 mm crankpin \/ 45 mm rod-housing interface\u003c\/strong\u003e and the correctly selected bearing size. U.S. dates are model years; Japan-market dates describe production coverage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e JDM \/ naturally aspirated 4A-GE with the later 42\/45 mm assembly introduced at the September 1987 production change. \u003cstrong\u003eSeptember transition builds require actual crank\/rod identification, not the month alone.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market \/ naturally aspirated 4A-GE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e Supercharged (U.S.-Market) \/ 4A-GZE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla \/ Sprinter — AE92 — Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno (Japan-market) \/ 4A-GE 16-valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Corolla Levin \/ Sprinter Trueno GT-Z (Japan-market) \/ 4A-GZE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S coupe (U.S.-Market) \/ 4A-GE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNot for original 40 mm crankpin \/ 43 mm rod-housing assemblies, including original AE86 4A-GE and early naturally aspirated AW11 engines of that size. Original 4A-C, 4A-F and 4A-FE assemblies are not covered.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA swap, replacement crankshaft or aftermarket rod does not establish compatibility by chassis or nominal diameter alone.\u003c\/strong\u003e Bearing seats, locating tabs, axial width, crank fillets and assembled clearance must match the supported configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToyota numbered selective bearing grades do not directly map to these ACL options.\u003c\/strong\u003e No universal oil-clearance or machining target is implied.\u003c\/li\u003e\n\u003cli\u003eThe listed factory applications use 16-valve engines. \u003cstrong\u003e20-valve engine applications are not covered.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBearing Position:\u003c\/strong\u003e Connecting-rod big end\u003cbr\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Race Series tri-metal with hardened steel backing\u003cbr\u003e\n\u003cstrong\u003eNominal Crankpin Family:\u003c\/strong\u003e 42 mm\u003cbr\u003e\n\u003cstrong\u003eStandard Crankpin Reference:\u003c\/strong\u003e 41.985–42.000 mm\u003cbr\u003e\n\u003cstrong\u003eBare Rod-Housing Reference:\u003c\/strong\u003e 45.000–45.024 mm\u003cbr\u003e\n\u003cstrong\u003eMaximum Shell Axial Length:\u003c\/strong\u003e 17.10 mm\u003cbr\u003e\n\u003cstrong\u003eShell Design:\u003c\/strong\u003e Identical upper and lower halves\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eRod Bearings and Main Bearings\u003c\/h2\u003e\n\u003cp\u003eRod bearings support the connecting rods on the crankpins; main bearings support the crankshaft in the engine block. \u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/acl-race-main-bearings-toyota-4age-4agze-ae86-aw11\"\u003e\u003cstrong\u003eACL Race Series standard-size main bearings\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e are a separate, complementary product for a compatible standard-size main-journal assembly. Selecting a rod-bearing undersize does not determine the main-bearing size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003eChoose one bearing size. Every option includes eight rod-bearing half-shells, enough for four connecting rods. Main bearings, thrust washers, connecting rods, piston-pin bushes and gaskets are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing Size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eStandard clearance\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e0.001 in extra clearance\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e0.025 mm reduced clearance\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e0.25 mm crank undersize\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e0.50 mm crank undersize\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL","offers":[{"title":"Standard clearance","offer_id":67851677794613,"sku":"1500","price":79.95,"currency_code":"USD","in_stock":true},{"title":"0.001 in extra clearance","offer_id":67851677827381,"sku":"1501","price":79.95,"currency_code":"USD","in_stock":true},{"title":"0.025 mm reduced clearance","offer_id":67851677860149,"sku":"1502","price":79.95,"currency_code":"USD","in_stock":true},{"title":"0.25 mm crank undersize","offer_id":67851677892917,"sku":"1503","price":79.95,"currency_code":"USD","in_stock":true},{"title":"0.50 mm crank undersize","offer_id":67851677925685,"sku":"1504","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/acl-race-series-rod-bearing-set-01.png?v=1792551131"},{"product_id":"bando-power-steering-belt-ae92-corolla-sr5-coupe","title":"AE92 Bando Power Steering Belt | 4A-F \/ 4A-FE (1988-91 Corolla)","description":"\u003ch2\u003eBando Power Steering Belt\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1988–1991 Toyota Corolla AE92 coupe equipped with a 4A-F \/ 4A-FE engine and power steering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis Bando belt replaces the \u003cstrong\u003eseparate power-steering drive belt\u003c\/strong\u003e on U.S.-market 1988–1991 Toyota Corolla AE92 SR5 coupes: 1988–1989 models with \u003cstrong\u003e4A-F\u003c\/strong\u003e and 1990–1991 models with \u003cstrong\u003e4A-FE\u003c\/strong\u003e. It runs between the water-pump pulley and power-steering pump in the factory accessory-drive arrangement.\u003c\/p\u003e\n\u003cp\u003eThe alternator and air-conditioning drives use separate belts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSR5-specific power-steering application\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree longitudinal ribs\u003c\/strong\u003e matched to the factory power-steering drive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e635 mm effective length\u003c\/strong\u003e and 0.42-inch top width.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 — SR5 Coupe (U.S.-Market)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e 4A-F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e 4A-FE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFactory power steering required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor the original SR5 water-pump and power-steering pulley arrangement; changed pulley spacing or accessory-drive conversions are outside this fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Bando\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Power steering accessory drive belt\u003cbr\u003e\u003cstrong\u003eRib Count:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eEffective Length:\u003c\/strong\u003e 635 mm \/ 25.0 in\u003cbr\u003e\u003cstrong\u003eTop Width:\u003c\/strong\u003e 0.42 in\u003cbr\u003e\u003cstrong\u003eDrive Circuit:\u003c\/strong\u003e Water-pump pulley to power-steering pump\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003e(1) Bando power steering belt\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n","brand":"Bando","offers":[{"title":"Default Title","offer_id":67926075343157,"sku":"1688","price":6.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/BANDOSerpentineBeltPackage_f7f0b7a3-194c-4c4e-a7d6-daffb0bcc22d.png?v=1793064538"},{"product_id":"aisin-timing-belt-water-pump-kit-ae92-corolla-sr5","title":"AE92 AISIN Timing Belt \u0026 Water Pump Kit | 4A-F \/ 4A-FE (1988-91 Corolla)","description":"\u003ch2\u003eAISIN Timing Belt \u0026amp; Water Pump Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1988–1991 Toyota Corolla AE92 SR5 coupes equipped with a 4A-F or 4A-FE engine in U.S.-market configuration.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis AISIN timing belt and water pump kit brings the core timing-service components together for \u003cstrong\u003eU.S.-market 1988–1991 Toyota Corolla AE92 SR5 coupes\u003c\/strong\u003e with the 4A-F or 4A-FE engine. It pairs an AISIN water pump with a Mitsuboshi timing belt for owners refreshing the factory engine's timing and cooling components.\u003c\/p\u003e\n\u003cp\u003eThe water pump includes its housing rather than only the separately serviced pump front section. The mechanical tensioner and spring are supplied together, making this a combined service kit rather than a belt-only replacement.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMitsuboshi timing belt\u003c\/strong\u003e with the 94-tooth configuration used by the supported engines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater pump with housing\u003c\/strong\u003e for replacement of the complete pump assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical tensioner and spring\u003c\/strong\u003e supplied as part of the timing-service package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo O-rings included\u003c\/strong\u003e with the pump and timing components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne combined kit\u003c\/strong\u003e serves both supported SR5 engine\/year groups without separate purchase options.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 — U.S.-Market SR5 Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e 4A-F engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e 4A-FE engine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Does not fit Corolla GT-S or Japanese-market Corolla Levin\/Sprinter Trueno AE92 models with 4A-GE or 4A-GZE engines.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor the \u003cstrong\u003efactory 4A-F or 4A-FE timing and water-pump arrangement\u003c\/strong\u003e. An engine swap or modified cooling arrangement is not covered by the body\/chassis application alone.\u003c\/li\u003e\n\u003cli\u003eThe 4A-GE and 4A-GZE timing systems use a different belt and pump arrangement; this is not a substitute kit for those engines.\u003c\/li\u003e\n\u003cli\u003eThis kit services the engine timing drive and water pump, not the external accessory-drive belts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e AISIN\u003cbr\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Timing belt and water pump service kit\u003cbr\u003e\n\u003cstrong\u003eTiming Belt Manufacturer:\u003c\/strong\u003e Mitsuboshi\u003cbr\u003e\n\u003cstrong\u003eTiming Belt Tooth Count:\u003c\/strong\u003e 94\u003cbr\u003e\n\u003cstrong\u003eTensioner Design:\u003c\/strong\u003e Mechanical, spring-tensioned\u003cbr\u003e\n\u003cstrong\u003eWater Pump Configuration:\u003c\/strong\u003e Complete assembly with housing\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(1) AISIN water pump with housing\u003c\/li\u003e\n\u003cli\u003e(1) Mitsuboshi timing belt\u003c\/li\u003e\n\u003cli\u003e(1) Mechanical timing-belt tensioner assembly\u003c\/li\u003e\n\u003cli\u003e(1) Tensioner spring\u003c\/li\u003e\n\u003cli\u003e(2) O-rings\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"AISIN","offers":[{"title":"Default Title","offer_id":67971599630645,"sku":"1703","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/AutomotiveTimingandWaterPumpKit.png?v=1793131990"},{"product_id":"bando-rib-ace-power-steering-belt-4a-ge-no-ac-1985-1991-corolla","title":"Bando Rib Ace Power Steering Belt | 4A-GE Without A\/C (1985-91 Corolla)","description":"\u003ch2\u003eBando Rib Ace Power Steering Belt\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1985–1987 Toyota Corolla AE86 GT-S and 1988–1991 Corolla AE92 GT-S coupes with the 4A-GE engine, factory power steering and no air conditioning.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis Bando Rib Ace belt replaces the power-steering accessory belt on U.S.-market 1985–1987 Toyota Corolla AE86 GT-S and 1988–1991 Corolla AE92 GT-S coupes with the 4A-GE engine. It serves the original power-steering drive arrangement without A\/C, retaining the factory pulleys, brackets and idler.\u003c\/p\u003e\n\u003cp\u003eThe five-rib belt supplies one replacement service part rather than a complete accessory-belt set. Its 920 mm effective length is specific to the supported power-steering configuration; it is not a substitute for the configuration-specific belt used in a combined A\/C and power-steering drive.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower steering without A\/C:\u003c\/strong\u003e application-specific coverage for the original 4A-GE accessory layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-rib profile:\u003c\/strong\u003e matches the specified ribbed pulley arrangement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e920 mm effective length:\u003c\/strong\u003e keeps this configuration distinct from the combined A\/C drive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEPDM rubber:\u003c\/strong\u003e aftermarket Rib Ace construction for the accessory-drive environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e U.S.-market GT-S, 4A-GE engine and factory power steering \u003cstrong\u003ewithout A\/C\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e U.S.-market GT-S coupe, 4A-GE engine and factory power steering \u003cstrong\u003ewithout A\/C\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor the original no-A\/C power-steering drive only.\u003c\/strong\u003e It does not replace the belt used for a combined A\/C and power-steering circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for Corolla SR5 models.\u003c\/strong\u003e The AE92 SR5 uses a different three-rib power-steering arrangement. This AE92 application is the GT-S coupe, not a blanket fitment for every Corolla body or engine.\u003c\/li\u003e\n\u003cli\u003eOriginal pulleys, brackets and the applicable idler are required and are not included. Removing an A\/C compressor alone does not establish this fitment if the remaining pulley or bracket arrangement differs from the factory no-A\/C configuration.\u003c\/li\u003e\n\u003cli\u003eEngine swaps and modified accessory drives require matching the installed equipment rather than chassis year alone.\u003c\/li\u003e\n\u003cli\u003eThis is a power-steering accessory belt, not an engine timing belt, alternator belt or A\/C belt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Bando\u003cbr\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e Rib Ace\u003cbr\u003e\u003cstrong\u003eBelt Type:\u003c\/strong\u003e V-ribbed accessory drive belt\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e EPDM rubber\u003cbr\u003e\u003cstrong\u003eRib Count:\u003c\/strong\u003e 5\u003cbr\u003e\u003cstrong\u003eEffective Length:\u003c\/strong\u003e 920 mm\u003cbr\u003e\u003cstrong\u003eTop Width:\u003c\/strong\u003e 0.7 in\u003cbr\u003e\u003cstrong\u003eDrive Position:\u003c\/strong\u003e Power steering without A\/C\u003cbr\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e One belt\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e(1) Bando Rib Ace power steering belt.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Bando","offers":[{"title":"Default Title","offer_id":67971861840181,"sku":null,"price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/BANDOSerpentineBeltProductShot.png?v=1793476780"},{"product_id":"denso-spark-plug-set-ae92-sr5","title":"AE92 DENSO Spark Plug Set | 4A-F \/ 4A-FE (1988-91 Corolla)","description":"\u003ch2\u003eDENSO Standard U-Groove \/ Iridium TT Spark Plug Sets\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1988–1991 Toyota Corolla AE92 coupe equipped with the 4A-F or 4A-FE engine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eRefresh the spark plugs on your \u003cstrong\u003e1988–1991 U.S.-market Toyota Corolla SR5 AE92 coupe\u003c\/strong\u003e with an engine-matched set of four. Choose Standard U-Groove for original-style replacement or Iridium TT for a longer-wearing electrode design.\u003c\/p\u003e\n\u003cp\u003eDENSO supplied original-equipment spark plugs for these engines. \u003cstrong\u003eBoth choices are factory pre-gapped — no gap adjustment required\u003c\/strong\u003e for the listed original 4A-F and 4A-FE applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard U-Groove:\u003c\/strong\u003e nickel firing electrodes with a copper-core center electrode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChanneled U-Groove ground electrode\u003c\/strong\u003e supports spark development on the Standard option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIridium TT:\u003c\/strong\u003e fine iridium center electrode and platinum ground tip resist electrode wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistor construction\u003c\/strong\u003e for ignition-noise suppression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket-seat design and solid terminals\u003c\/strong\u003e match the original plug connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e SR5 (U.S.-Market) \/ 4A-F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e SR5 (U.S.-Market) \/ 4A-FE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSelect the year range for the original engine. \u003cstrong\u003eStandard U-Groove plugs differ between the two year ranges;\u003c\/strong\u003e Iridium TT uses the same plugs for both.\u003c\/li\u003e\n\u003cli\u003eEngine swaps and changed cylinder heads are outside this factory-engine fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DENSO\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Ignition\u003cbr\u003e\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Spark Plug\u003cbr\u003e\u003cstrong\u003eThread Diameter:\u003c\/strong\u003e 14 mm\u003cbr\u003e\u003cstrong\u003eThread Reach:\u003c\/strong\u003e 19 mm\u003cbr\u003e\u003cstrong\u003eHex Size:\u003c\/strong\u003e 16 mm\u003cbr\u003e\u003cstrong\u003eSeat Type:\u003c\/strong\u003e Gasket\u003cbr\u003e\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Solid\u003cbr\u003e\u003cstrong\u003eFactory Pre-Gapped:\u003c\/strong\u003e Standard U-Groove 1.1 mm for 1988–1989 and 0.8 mm for 1990–1991; Iridium TT 1.0 mm for both\u003cbr\u003e\u003cstrong\u003eOriginal Plug Gap:\u003c\/strong\u003e 1.1 mm for 1988–1989 4A-F; 0.8 mm for 1990–1991 4A-FE\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich Spark Plug Should You Buy?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eStandard U-Groove — Best for Original-Style Maintenance on a Budget\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Standard U-Groove if you want an economical replacement that retains the original nickel-electrode design. It is the lower-priced choice for routine spark-plug service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIridium TT — Best for Daily Driving with Longer-Wearing Electrodes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Iridium TT if electrode durability is worth the higher upfront cost. Its iridium and platinum firing tips resist wear, without a promised power increase or a vehicle-specific extended service interval.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e Choose Standard U-Groove for original-style replacement and lower purchase cost, or Iridium TT when longer-wearing electrodes are your priority.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003eEvery set contains \u003cstrong\u003efour matching DENSO spark plugs\u003c\/strong\u003e. Both spark plug types are offered for each year range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. Year Range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989\u003c\/strong\u003e — 4A-F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991\u003c\/strong\u003e — 4A-FE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2. Spark Plug Type\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eIridium TT\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard U-Groove\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DENSO","offers":[{"title":"1988–1989 \/ Standard U-Groove","offer_id":68024158126389,"sku":"1732","price":19.99,"currency_code":"USD","in_stock":true},{"title":"1988–1989 \/ Iridium TT","offer_id":67994676035893,"sku":"1733","price":35.99,"currency_code":"USD","in_stock":true},{"title":"1990–1991 \/ Standard U-Groove","offer_id":68024158159157,"sku":"1734","price":19.99,"currency_code":"USD","in_stock":true},{"title":"1990–1991 \/ Iridium TT","offer_id":67995228930357,"sku":"1735","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/ae86-denso-spark-plug-set-01.png?v=1792551065"},{"product_id":"denso-spark-plug-set-ae92-4age","title":"AE92 DENSO Spark Plug Set | 4A-GE (1988-91 Corolla)","description":"\u003ch2\u003eDENSO Double Platinum \/ Iridium TT Spark Plug Sets\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1988–1991 U.S.-market Toyota Corolla GT-S AE92 coupe equipped with the original naturally aspirated 4A-GE engine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eRefresh the spark plugs on your \u003cstrong\u003e1988–1991 U.S.-market Corolla GT-S AE92 coupe\u003c\/strong\u003e with a complete set of four matching DENSO plugs for the original naturally aspirated 4A-GE.\u003c\/p\u003e\n\u003cp\u003eChoose \u003cstrong\u003eDouble Platinum\u003c\/strong\u003e or \u003cstrong\u003eIridium TT\u003c\/strong\u003e for either year range. Double Platinum provides a lower-cost, original-style replacement; Iridium TT uses a fine iridium center electrode and platinum ground tip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFactory Pre-Gapped — No Regapping Required\u003c\/strong\u003e for the matching original naturally aspirated 4A-GE application.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour matching spark plugs\u003c\/strong\u003e for one complete four-cylinder engine service set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Platinum:\u003c\/strong\u003e platinum on both electrodes for original-style replacement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIridium TT:\u003c\/strong\u003e fine iridium center electrode and platinum ground tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory preset gaps:\u003c\/strong\u003e Double Platinum 1.1 mm for 1988–1989 or 0.8 mm for 1990–1991; Iridium TT 1.0 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGasket seat and solid terminal\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e14 mm thread \/ 19 mm reach \/ 16 mm hex\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 coupe — U.S.-Market GT-S\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e 4A-GE \/ Double Platinum or Iridium TT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e 4A-GE \/ Double Platinum or Iridium TT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the year range matching your GT-S.\u003c\/strong\u003e The 1988–1989 and 1990–1991 sets use different plug profiles and are not interchangeable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor the original naturally aspirated 4A-GE engine.\u003c\/strong\u003e SR5 models with 4A-F or 4A-FE engines are not covered. Engine swaps, changed cylinder heads and forced-induction conversions are outside this fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor an ignition-wire refresh on \u003cstrong\u003e1988–1989 GT-S models\u003c\/strong\u003e, the \u003ca href=\"https:\/\/preserverad.com\/products\/denso-ignition-wire-set-toyota-mr2-aw11-4age\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eDENSO Ignition Wire Set\u003c\/strong\u003e\u003c\/a\u003e is sold separately.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DENSO\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Spark Plug Set\u003cbr\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 matching plugs\u003cbr\u003e\u003cstrong\u003eThread Diameter:\u003c\/strong\u003e 14 mm\u003cbr\u003e\u003cstrong\u003eThread Reach:\u003c\/strong\u003e 19 mm\u003cbr\u003e\u003cstrong\u003eHex Size:\u003c\/strong\u003e 16 mm\u003cbr\u003e\u003cstrong\u003eSeat Type:\u003c\/strong\u003e Gasket\u003cbr\u003e\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Solid\u003cbr\u003e\u003cstrong\u003eFactory Preset Gap:\u003c\/strong\u003e Double Platinum 1.1 mm for 1988–1989 or 0.8 mm for 1990–1991; Iridium TT 1.0 mm\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich Spark Plug Should You Buy?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDouble Platinum — Best for Factory-Style Replacement on a Budget\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Double Platinum for original-style platinum construction at a lower purchase cost on either 1988–1989 or 1990–1991 GT-S models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIridium TT — Best for Everyday Ignition Maintenance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Iridium TT for routine replacement when you prefer a fine-wire iridium plug with a platinum ground tip. A matching set is offered for either application group; both plug styles serve the same everyday maintenance purpose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e Choose Double Platinum for original-style replacement and lower purchase cost, or Iridium TT if you prefer its fine-wire electrode design. Both styles are offered for each year range; neither choice carries a promised horsepower gain.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003eSelect the application group, then the spark plug type. \u003cstrong\u003eEvery set includes (4) matching DENSO spark plugs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. Year Range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1988–1989\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1990–1991\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2. Spark Plug Type\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Platinum:\u003c\/strong\u003e offered for both application groups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIridium TT:\u003c\/strong\u003e offered for both application groups\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DENSO","offers":[{"title":"1988–1989 \/ Double Platinum","offer_id":68029847175477,"sku":"1741","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1988–1989 \/ Iridium TT","offer_id":67994755629365,"sku":"1742","price":35.99,"currency_code":"USD","in_stock":true},{"title":"1990–1991 \/ Double Platinum","offer_id":67994755694901,"sku":"1743","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1990–1991 \/ Iridium TT","offer_id":67994755662133,"sku":"1744","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/ae86-denso-spark-plug-set-01.png?v=1792551065"},{"product_id":"denso-spark-plug-set-ae92-gtz-4agze","title":"AE92 DENSO Spark Plug Set | 4A-GZE (1987-91 Corolla)","description":"\u003ch2\u003eDENSO Double Platinum \/ Iridium TT Spark Plug Sets\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eFor 1987–1991 Toyota Corolla AE92 coupe equipped with the supercharged 4A-GZE engine.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eRefresh the spark plugs on your \u003cstrong\u003e1987–1991 Japanese-market Toyota Corolla Levin or Sprinter Trueno GT-Z AE92 coupe with the supercharged 4A-GZE engine\u003c\/strong\u003e. Each set supplies four matching DENSO spark plugs. Choose Double Platinum or Iridium TT for the same factory-engine application.\u003c\/p\u003e\u003cp\u003eDENSO supplied original-equipment spark plugs for this Japanese 4A-GZE application. \u003cstrong\u003eBoth plug types are factory pre-gapped — no gap adjustment required\u003c\/strong\u003e for the original supercharged 4A-GZE configuration. Double Platinum retains original-style platinum construction; Iridium TT uses a fine iridium center electrode and platinum ground tip.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour matching spark plugs\u003c\/strong\u003e for one complete engine service set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Platinum:\u003c\/strong\u003e platinum on both electrodes for original-style replacement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIridium TT:\u003c\/strong\u003e fine iridium center electrode and platinum ground tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory pre-gapped:\u003c\/strong\u003e Double Platinum 0.8 mm; Iridium TT 1.0 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGasket seat and solid terminal\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e14 mm thread \/ 19 mm reach \/ 16 mm hex\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Levin \/ Trueno GT-Z (Japanese-Market) \/ 4A-GZE supercharged\u003c\/li\u003e\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eFitment Notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFor the supercharged 4A-GZE, not naturally aspirated SR5 or GT-S engines.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOriginal 4A-GZE plug gap: \u003cstrong\u003e0.8 mm\u003c\/strong\u003e. Double Platinum arrives preset to \u003cstrong\u003e0.8 mm\u003c\/strong\u003e; Iridium TT arrives preset to \u003cstrong\u003e1.0 mm\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eBoth plug types cover the same listed factory GT-Z application; no year-range choice is needed.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, changed cylinder heads, turbo conversions and altered boost or ignition configurations are outside this factory-engine fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e DENSO\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Ignition\u003cbr\u003e\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Spark Plug\u003cbr\u003e\u003cstrong\u003eThread Diameter:\u003c\/strong\u003e 14 mm\u003cbr\u003e\u003cstrong\u003eThread Reach:\u003c\/strong\u003e 19 mm\u003cbr\u003e\u003cstrong\u003eHex Size:\u003c\/strong\u003e 16 mm\u003cbr\u003e\u003cstrong\u003eSeat Type:\u003c\/strong\u003e Gasket\u003cbr\u003e\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e Solid\u003cbr\u003e\u003cstrong\u003eFactory Pre-Gapped:\u003c\/strong\u003e Double Platinum 0.8 mm; Iridium TT 1.0 mm\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWhich Spark Plug Should You Buy?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDouble Platinum — Best for Original-Style Restoration\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose Double Platinum if retaining the original plug design is your priority, because it uses platinum on both electrodes. It covers the same factory engine and years as Iridium TT.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIridium TT — Best for Everyday Ignition Maintenance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose Iridium TT for routine spark-plug replacement. Its fine iridium center electrode and platinum ground tip provide an alternative to the original-style platinum design, not a promised power upgrade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e Choose Double Platinum for original-style restoration, or Iridium TT for its fine-wire electrode design. Neither is presented as a power upgrade.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\u003cp\u003eEvery set contains \u003cstrong\u003efour matching DENSO spark plugs\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1. Spark Plug Type\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDouble Platinum\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIridium TT\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DENSO","offers":[{"title":"Double Platinum","offer_id":67995601797429,"sku":"1745","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Iridium TT","offer_id":67994971898165,"sku":"1746","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/ae86-denso-spark-plug-set-01.png?v=1792551065"},{"product_id":"aisin-82c-thermostat-aw11-mr2-ae92-corolla","title":"AISIN 82°C Coolant Thermostat (1984-89 MR2 \/ 1987-91 Corolla)","description":"\u003ch2\u003eAISIN 82°C Coolant Thermostat\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1984–1989 Toyota MR2 AW11 and 1987–1991 Toyota Corolla AE92 coupe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis AISIN thermostat uses an \u003cstrong\u003e82°C \/ 180°F opening temperature\u003c\/strong\u003e in the original cooling systems of the 1984–1989 Toyota MR2 AW11 and 1987–1991 Toyota Corolla AE92 coupe. Its conventional wax-pellet valve regulates coolant circulation as the engine warms up, retaining the factory opening temperature rather than converting to a low-temperature thermostat.\u003c\/p\u003e\n\u003cp\u003eThe with-seal option adds the \u003cstrong\u003eAISIN thermostat ring\u003c\/strong\u003e used by these MR2 and Corolla applications. It fits around the thermostat and is different from the flat housing gasket required by the AE86.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e82°C \/ 180°F opening temperature\u003c\/strong\u003e for factory-temperature cooling-system service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard wax-pellet design\u003c\/strong\u003e with a 48 mm sealing flange and 28 mm bypass flange.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMade-in-Japan AISIN thermostat.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOptional \u003cstrong\u003eAISIN thermostat seal\u003c\/strong\u003e matched to the AW11 and AE92 applications below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Trueno (JDM) \/ AE92 \/ 4A-GE, 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Levin (JDM) \/ AE92 \/ 4A-GE, 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e Levin \/ Trueno (JDM) \/ AE91 \/ 5A-F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Levin \/ Trueno (JDM) \/ AE91 \/ 5A-FE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1989–1991:\u003c\/strong\u003e Levin \/ Trueno (JDM) \/ AE91 \/ 5A-FHE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e SR5 (U.S.-Market) \/ 4A-F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e SR5 (U.S.-Market) \/ 4A-FE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne new thermostat seal is required for installation.\u003c\/strong\u003e Choose the with-seal option or supply the correct seal separately when purchasing Thermostat Only.\u003c\/li\u003e\n\u003cli\u003eBoth options fit the factory engine and thermostat-housing combinations above. Engine swaps or modified housings require separate fitment confirmation.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe included AW11 \/ AE92 ring does not fit the AE86 thermostat housing.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e AISIN\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Coolant thermostat\u003cbr\u003e\u003cstrong\u003eOpening Temperature:\u003c\/strong\u003e 82°C \/ 180°F\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Standard wax pellet\u003cbr\u003e\u003cstrong\u003eSealing Flange Diameter:\u003c\/strong\u003e 48 mm\u003cbr\u003e\u003cstrong\u003eBypass Flange Diameter:\u003c\/strong\u003e 28 mm\u003cbr\u003e\u003cstrong\u003eThermostat Country of Manufacture:\u003c\/strong\u003e Japan\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThermostat Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e1 AISIN 82°C coolant thermostat.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eThermostat seal not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThermostat + AW11 \/ AE92 Seal\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 AISIN 82°C coolant thermostat.\u003c\/li\u003e\n\u003cli\u003e1 AISIN thermostat seal.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AISIN","offers":[{"title":"Thermostat Only","offer_id":67997955129653,"sku":"1760","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Thermostat + AW11 \/ AE92 Seal","offer_id":67997955162421,"sku":"1761","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/BronzeCoreMechanicalValveAssembly.png?v=1793655254"},{"product_id":"koyo-timing-belt-tensioner-4age-4agze-ae86-aw11-ae92","title":"Koyo Timing Belt Tensioner | 4A-GE \/ 4A-GZE 16V (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eKoyo Timing Belt Tensioner\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with factory 4A-GE or 4A-GZE 16-valve engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis Koyo mechanical timing-belt tensioner replaces the idler assembly on 4A-GE and 4A-GZE 16-valve engines in the 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComplete mechanical timing-belt tensioner\/idler assembly.\u003c\/li\u003e\n\u003cli\u003eOriginal-style replacement for the factory spring-tensioned arrangement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Sprinter Trueno and Corolla Levin (JDM) \/ 4A-GE or 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNot for AE86 SR5 models with the 4A-C or AE92 SR5 models with the 4A-F or 4A-FE.\u003c\/li\u003e\n\u003cli\u003eThe correct original tension spring and mounting hardware must be serviceable; worn or damaged supporting components require replacement.\u003c\/li\u003e\n\u003cli\u003eCoverage is for factory 16-valve timing systems. Engine swaps and modified timing arrangements require separate verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Koyo \/ JTEKT\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mechanical timing-belt tensioner\u003cbr\u003e\u003cstrong\u003eEngine:\u003c\/strong\u003e 4A-GE \/ 4A-GZE 16-valve\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eOne mechanical timing-belt tensioner\/idler assembly.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Koyo","offers":[{"title":"Default Title","offer_id":68005912543541,"sku":"1725","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/KoyoTensionerBearingAssembly.png?v=1793659466"},{"product_id":"stone-valve-cover-gasket-4af-4afe-ae92-corolla-sr5","title":"AE92 Stone Valve Cover Gasket | 4A-F \/ 4A-FE (1988-91 Corolla)","description":"\u003ch2\u003eStone Valve Cover Gasket\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1988–1991 Toyota Corolla AE92 coupe equipped with the 4A-F or 4A-FE engine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis Stone perimeter gasket seals the joint between the valve cover and cylinder head on the 1988–1991 Toyota Corolla AE92 SR5 coupe. It is available alone or with the required AISIN black form-in-place gasket (FIPG) sealant.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-piece perimeter gasket\u003c\/strong\u003e for the valve cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo configurations:\u003c\/strong\u003e gasket alone or with AISIN black FIPG sealant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e SR5 (U.S.-Market) \/ 4A-F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e SR5 (U.S.-Market) \/ 4A-FE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNot for GT-S models with the 4A-GE or Japanese-market 4A-GE \/ 4A-GZE coupes.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eThe separate spark-plug-tube seals, bolt grommets and semi-circular plug are not included in either configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGasket Brand:\u003c\/strong\u003e Stone\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Valve-cover perimeter gasket\u003cbr\u003e\u003cstrong\u003eEngine:\u003c\/strong\u003e 4A-F \/ 4A-FE\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGasket Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne Stone valve-cover perimeter gasket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable FIPG sealant is required for installation, is not included in this option, and must be purchased separately.\u003c\/strong\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/preserverad.com\/products\/aisin-black-fipg-gasket-sealant-3oz\"\u003eAISIN black FIPG sealant\u003c\/a\u003e\u003c\/strong\u003e is available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGasket with Sealant\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne Stone valve-cover perimeter gasket.\u003c\/li\u003e\n\u003cli\u003eOne AISIN black FIPG sealant tube with one nozzle and one winding key.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stone","offers":[{"title":"Gasket Only","offer_id":68005965168949,"sku":"1726","price":4.25,"currency_code":"USD","in_stock":true},{"title":"Gasket with Sealant","offer_id":68005965201717,"sku":"1727","price":23.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/1logos_1_-Recovered_69a99970-918c-444e-8596-c9366f5cced0.png?v=1793660146"},{"product_id":"ae86-stone-intake-manifold-gaskets-big-port-4age","title":"Stone Intake Manifold Gaskets | Big-Port 4A-GE (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eStone Intake Manifold Gaskets\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1989 Toyota Corolla AE92 coupe equipped with the original big-port 16V 4A-GE engine and T-VIS intake.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eStone intake gaskets replace the seals at the original intake joints on 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11 and 1987–1989 Toyota Corolla AE92 coupes with the big-port 4A-GE T-VIS intake. Choose a single gasket for the joint being resealed or the two-gasket option for both sides of the T-VIS assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo distinct sealing positions:\u003c\/strong\u003e cylinder head to T-VIS and T-VIS to intake manifold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual gasket choices\u003c\/strong\u003e for either intake joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-gasket option\u003c\/strong\u003e includes one of each seal for the original T-VIS assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ big-port 4A-GE with T-VIS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ big-port 4A-GE with T-VIS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ big-port 4A-GE with T-VIS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ naturally aspirated 4A-GE with T-VIS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ naturally aspirated 4A-GE with T-VIS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e JDM Corolla Levin and Sprinter Trueno coupes \/ big-port 4A-GE with T-VIS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Corolla Sport GT-S coupe \/ big-port 4A-GE with T-VIS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor the original big-port 16V 4A-GE intake with T-VIS. \u003cstrong\u003eNot for small-port engines.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAE92 intake design changed during 1989. \u003cstrong\u003eModel year or build month alone does not establish fitment; these gaskets require the original big-port intake configuration.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe head-side gasket seals the cylinder-head-to-T-VIS joint; the other gasket seals the T-VIS-to-intake-manifold joint. The two-gasket option supplies one of each.\u003c\/li\u003e\n\u003cli\u003eFactory fitment does not establish compatibility with T-VIS-delete plates, aftermarket intake adapters or engine-swap combinations.\u003c\/li\u003e\n\u003cli\u003eNot for AE86 SR5 models with the 4A-C engine or AE92 SR5 models with the 4A-F or 4A-FE engine.\u003c\/li\u003e\n\u003cli\u003eThe two-gasket option covers the two naturally aspirated intake joints, not every seal used during complete intake-system removal. Throttle-body, injector, fuel-line and other disturbed-joint seals are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Stone\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Intake manifold gasket\u003cbr\u003e\u003cstrong\u003eEngine:\u003c\/strong\u003e 4A-GE big-port 16V\u003cbr\u003e\u003cstrong\u003eGasket Positions:\u003c\/strong\u003e Cylinder head to T-VIS; T-VIS to intake manifold\u003cbr\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e One gasket or two distinct gaskets, depending on selection\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHead-Side Gasket\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e1 × head-side intake gasket\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManifold-to-T-VIS Gasket\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e1 × manifold-to-T-VIS gasket\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBoth T-VIS Gaskets\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 × head-side intake gasket\u003c\/li\u003e\n\u003cli\u003e1 × manifold-to-T-VIS gasket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stone","offers":[{"title":"Head-Side Gasket","offer_id":68006328041781,"sku":"1737","price":5.95,"currency_code":"USD","in_stock":true},{"title":"Manifold-to-T-VIS Gasket","offer_id":68006328074549,"sku":"1738","price":5.5,"currency_code":"USD","in_stock":true},{"title":"Both T-VIS Gaskets","offer_id":68006328107317,"sku":"1739","price":11.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/StoneGasketsProductCatalogShot.png?v=1793736957"},{"product_id":"stone-intake-manifold-gasket-big-port-4agze-aw11-mr2-ae92-corolla","title":"Stone Intake Manifold Gasket | Big-Port 4A-GZE (1986-89 MR2 \/ 1987-89 Corolla)","description":"\u003ch2\u003eStone Intake Manifold Gasket\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eFor 1986–1989 Toyota MR2 AW11 and 1987–1989 Toyota Corolla AE92 coupe equipped with the original big-port 16V 4A-GZE engine.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis head-side intake gasket seals the intake-manifold-to-cylinder-head joint on 1986–1989 Toyota MR2 AW11 and 1987–1989 Toyota Corolla AE92 coupes with the original big-port 16V 4A-GZE engine.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle head-side gasket\u003c\/strong\u003e for the original supercharged intake-manifold-to-head interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBig-port 16V fitment\u003c\/strong\u003e for the supported 4A-GZE applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e JDM Corolla Levin GT-Z and Sprinter Trueno GT-Z coupes \/ big-port 4A-GZE.\u003c\/li\u003e\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eFitment Notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFor the original big-port 16V supercharged intake. \u003cstrong\u003eDoes not fit the later small-port intake.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAE92 intake design changed during 1989. \u003cstrong\u003eModel year or build month alone does not establish fitment; this gasket requires the original big-port intake configuration.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Stone\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Intake Manifold Gasket\u003cbr\u003e\u003cstrong\u003eEngine:\u003c\/strong\u003e 4A-GZE Big-Port 16V\u003cbr\u003e\u003cstrong\u003eGasket Position:\u003c\/strong\u003e Intake manifold to cylinder head\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 × head-side intake gasket\u003c\/li\u003e\u003c\/ul\u003e","brand":"Stone","offers":[{"title":"Default Title","offer_id":68032732201269,"sku":"1737","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/StoneLogoandPrecisionGasket_1.png?v=1793736958"},{"product_id":"stone-front-camshaft-oil-seal-4ac-4af-4afe-corolla","title":"Stone Front Camshaft Oil Seal | 4A-C \/ 4A-F \/ 4A-FE (1984-87 AE86 Corolla \/ 1988-91 AE92 Corolla)","description":"\u003ch2\u003eStone Front Camshaft Oil Seal\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1984–1987 Toyota Corolla AE86 equipped with a 4A-C engine and 1988–1991 Toyota Corolla AE92 coupe equipped with a 4A-F or 4A-FE engine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis Stone oil seal replaces the front camshaft seal at the timing-belt end of the engine. The supported 4A-C, 4A-F, and 4A-FE applications use \u003cstrong\u003eone front camshaft oil seal per engine\u003c\/strong\u003e. On the twin-cam 4A-F and 4A-FE, it seals the exhaust camshaft; the intake camshaft is driven through gears inside the cylinder head.\u003c\/p\u003e\u003cp\u003eFits 1984–1987 Toyota Corolla AE86 with 4A-C and 1988–1991 Toyota Corolla AE92 SR5 coupes with 4A-F or 4A-FE.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-seal repair:\u003c\/strong\u003e supplies the front camshaft seal required for the supported engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect replacement:\u003c\/strong\u003e fits the original front camshaft sealing location.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e1984–1987:\u003c\/strong\u003e SR5 (U.S.-Market) \/ 4A-C.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-market SR5 coupe with 4A-F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e U.S.-market SR5 coupe with 4A-FE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4A-F and 4A-FE are twin-cam engines but use one front camshaft seal.\u003c\/strong\u003e Seal quantity is determined by the engine design, not simply by the number of camshafts.\u003c\/li\u003e\n\u003cli\u003eOne seal does not supply both front camshaft positions on a 16V 4A-GE or 4A-GZE.\u003c\/li\u003e\n\u003cli\u003eFor engine-swapped or modified vehicles, match the installed engine and cylinder-head configuration rather than the original trim badge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Stone\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Camshaft oil seal\u003cbr\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Front camshaft; exhaust camshaft on 4A-F \/ 4A-FE\u003cbr\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 seal\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e1 Stone front camshaft oil seal\u003c\/li\u003e\u003c\/ul\u003e","brand":"Stone","offers":[{"title":"Default Title","offer_id":68038396543285,"sku":"1767","price":2.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/DetailedBlackRubberSealRing.png?v=1793919470"},{"product_id":"stone-front-camshaft-seal-pair-4age-4agze-ae86-aw11-ae92","title":"Stone Front Camshaft Oil Seal Pair | 4A-GE \/ 4A-GZE 16V (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eStone Front Camshaft Oil Seal Pair\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupe equipped with a 16V 4A-GE or 4A-GZE engine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis pair of Stone front camshaft oil seals replaces the seals at the timing-belt end of the intake and exhaust camshafts. The supported 16V 4A-GE and 4A-GZE engines use \u003cstrong\u003etwo identical front camshaft seals\u003c\/strong\u003e, so one pair supplies both positions.\u003c\/p\u003e\u003cp\u003eFits 1983–1987 Toyota Corolla AE86, 1984–1989 Toyota MR2 AW11, and 1987–1991 Toyota Corolla AE92 coupes with the supported 16V 4A-GE or 4A-GZE engines.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoth front camshaft positions:\u003c\/strong\u003e one seal for the intake camshaft and one for the exhaust camshaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-valve applications:\u003c\/strong\u003e covers the supported naturally aspirated 4A-GE and supercharged 4A-GZE engines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect replacement:\u003c\/strong\u003e fits the original camshaft sealing locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Trueno (JDM) \/ 16V 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Levin (JDM) \/ 16V 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 16V 4A-GE \/ Manual.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e JDM \/ 16V 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ 16V 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e JDM Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Japanese-market Corolla Levin \/ Sprinter Trueno GT and GT-APEX with 16V 4A-GE; GT-Z with 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e Japanese-market Corolla Levin \/ Sprinter Trueno GTV with 16V 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e U.S.-market GT-S coupe with 16V 4A-GE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor 16V engines only.\u003c\/strong\u003e This pair is not a complete front camshaft seal set for a 20V 4A-GE, which uses a different intake-side seal.\u003c\/li\u003e\n\u003cli\u003eFits both the supported big-port and small-port 16V applications. Intake-port size does not change this front camshaft seal pair.\u003c\/li\u003e\n\u003cli\u003eFor engine-swapped or modified vehicles, match the installed engine and cylinder-head configuration rather than the original trim badge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Stone\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Camshaft oil seal pair\u003cbr\u003e\u003cstrong\u003ePosition:\u003c\/strong\u003e Front intake and exhaust camshafts\u003cbr\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 identical seals\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e2 Stone front camshaft oil seals\u003c\/li\u003e\u003c\/ul\u003e","brand":"Stone","offers":[{"title":"Default Title","offer_id":68038403359029,"sku":"1768","price":5.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/1logos_1_d5f9858e-dd68-4a53-bdf3-87a891ecfa81.png?v=1793921221"},{"product_id":"wix-round-panel-air-filter-ae92-corolla","title":"AE92 WIX Air Filter | 4A-F \/ 5A-F (1987-89 Corolla)","description":"\u003ch2\u003eWIX Round-Panel Air Filter\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1987–1989 Toyota Corolla AE92 coupe equipped with a carbureted 4A-F or 5A-F engine and the original air cleaner.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis WIX replacement air-filter element services the original carbureted air cleaner on \u003cstrong\u003e1988–1989 U.S. Toyota Corolla SR5 4A-F coupes\u003c\/strong\u003e and \u003cstrong\u003e1987–1989 Japanese Toyota Corolla Levin and Sprinter Trueno 5A-F coupes\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is an original-housing maintenance option for owners retaining the factory intake. Circular media layers and molded plastic supports form a shallow round-panel element with an offset mounting hole.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynthetic filter media:\u003c\/strong\u003e Supported by molded plastic spacers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset center hole and indexing tab:\u003c\/strong\u003e Match the original carbureted air-cleaner mounting arrangement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStepped round-panel profile:\u003c\/strong\u003e Different upper and lower diameters locate the element inside its original housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla SR5 Coupe — AE92 — U.S. Market\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e Carbureted 4A-F with the original air cleaner. Manual and automatic transmissions; California and non-California models.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla Levin Coupe — AE91 — Japanese Market\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e Carbureted 5A-F with the original air cleaner; \u003cstrong\u003eproduction range May 1987–May 1989\u003c\/strong\u003e. Manual and automatic applications.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Sprinter Trueno Coupe — AE91 — Japanese Market\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e Carbureted 5A-F with the original air cleaner; \u003cstrong\u003eproduction range May 1987–May 1989\u003c\/strong\u003e. Manual and automatic applications.\u003c\/li\u003e\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal carbureted air cleaner required.\u003c\/strong\u003e The offset mounting hole and indexing tab must match the installed housing. Intake conversions and engine or housing swaps are not covered by factory chassis\/year fitment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not fit original fuel-injected air cleaners:\u003c\/strong\u003e 1990–1991 U.S. SR5 4A-FE, 1988–1991 U.S. GT-S 4A-GE, or Japanese 5A-FE, 5A-FHE, 4A-GE and 4A-GZE applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJapanese 1989 production change:\u003c\/strong\u003e Coverage is for carbureted 5A-F models within the stated production range, not every 1989 coupe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e WIX\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Engine air-filter element\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Round panel with circular media layers\u003cbr\u003e\u003cstrong\u003eMedia:\u003c\/strong\u003e Synthetic\u003cbr\u003e\u003cstrong\u003eSupports:\u003c\/strong\u003e Molded plastic\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 1.570 in\u003cbr\u003e\u003cstrong\u003eUpper Outside Diameter:\u003c\/strong\u003e 10.080 in\u003cbr\u003e\u003cstrong\u003eLower Outside Diameter:\u003c\/strong\u003e 9.000 in\u003cbr\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e Offset center hole and peripheral indexing tab\u003cbr\u003e\u003cstrong\u003eVehicle Quantity:\u003c\/strong\u003e One element\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003e(1) WIX round-panel air-filter element\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eThe air-cleaner housing, lid, securing hardware and hoses are not included.\u003c\/p\u003e","brand":"WIX","offers":[{"title":"Default Title","offer_id":68066064433461,"sku":"1763","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/PristineBlack-RimmedPleatedAirFilter.png?v=1793913328"},{"product_id":"wix-panel-air-filter-ae92-corolla-long-airbox","title":"AE92 WIX Panel Air Filter | 310 mm Long-Panel Element (1987-91 Corolla)","description":"\u003ch2\u003eWIX Panel Air Filter\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1987–1991 Toyota Corolla AE92 coupe equipped with the original airbox for a 310 mm long-panel element.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis WIX replacement element services the original long-panel airbox on \u003cstrong\u003e1990–1991 U.S. Toyota Corolla SR5 coupes\u003c\/strong\u003e and \u003cstrong\u003e1987–1991 Japanese Corolla Levin and Sprinter Trueno coupes with the long-panel airbox\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIts rectangular framed construction provides a service replacement for owners retaining the original intake housing rather than converting to an exposed filter.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynthetic filter media:\u003c\/strong\u003e Pleated rectangular panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated perimeter sealing edge:\u003c\/strong\u003e Locates between the matching original airbox and lid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral longitudinal support:\u003c\/strong\u003e Supports the element across its long dimension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOriginal long-panel airbox required.\u003c\/strong\u003e The matching rectangular element has an approximately 310 mm (12.2 in) long outside edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla SR5 Coupe — AE92 — U.S. Market\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e 4A-FE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla Levin Coupe — AE92 — Japanese Market\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e GT-Z \/ 4A-GZE supercharged; 1987–1991 production. Manual transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1989–1991:\u003c\/strong\u003e 4A-GE; 05\/1989–1991 production. May 1989 builds require the later long-panel housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Sprinter Trueno Coupe — AE92 — Japanese Market\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e GT-Z \/ 4A-GZE supercharged; 1987–1991 production. Manual transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1989–1991:\u003c\/strong\u003e 4A-GE; 05\/1989–1991 production. May 1989 builds require the later long-panel housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla Levin Coupe — AE91 — Japanese Market\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1989–1991:\u003c\/strong\u003e G\/L \/ 5A-FE; 05\/1989–1991 production. May 1989 builds require the later long-panel housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1989–1991:\u003c\/strong\u003e ZS \/ 5A-FHE; 1989–1991 production.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Sprinter Trueno Coupe — AE91 — Japanese Market\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1989–1991:\u003c\/strong\u003e G\/L \/ 5A-FE; 05\/1989–1991 production. May 1989 builds require the later long-panel housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1989–1991:\u003c\/strong\u003e XS \/ 5A-FHE; 1989–1991 production.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJapanese May 1989 transition:\u003c\/strong\u003e The 4A-GE and 5A-FE changeover month includes different airbox types. The later element has an approximately \u003cstrong\u003e310 mm \/ 12.2 in long outside edge\u003c\/strong\u003e; the earlier short element is approximately \u003cstrong\u003e250 mm \/ 10 in\u003c\/strong\u003e. These are element measurements, not complete airbox dimensions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not fit the original short-panel airbox\u003c\/strong\u003e in 1988–1991 U.S. Corolla GT-S 4A-GE coupes or 1987–05\/1989-production Japanese Levin and Trueno 4A-GE \/ 5A-FE coupes retaining that housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not fit the original round carbureted air cleaner\u003c\/strong\u003e in 1988–1989 U.S. Corolla SR5 4A-F or 1987–1989 Japanese Levin and Trueno 5A-F coupes.\u003c\/li\u003e\n\u003cli\u003eEngine swaps, intake conversions and modified airboxes are not covered by the original-vehicle fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e WIX\u003cbr\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Engine air-filter element\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Rectangular panel\u003cbr\u003e\u003cstrong\u003eMedia:\u003c\/strong\u003e Synthetic\u003cbr\u003e\u003cstrong\u003eEnds:\u003c\/strong\u003e Plastic\u003cbr\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 309.9 mm (12.2 in)\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 154.9 mm (6.1 in)\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 39.3 mm (1.55 in)\u003cbr\u003e\u003cstrong\u003eAirflow Rating:\u003c\/strong\u003e 210 CFM\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003e(1) WIX panel air-filter element\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eAirbox, lid, intake ducts, sensors and securing hardware are not included.\u003c\/p\u003e","brand":"WIX","offers":[{"title":"Default Title","offer_id":68066868789557,"sku":"1762","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/WIXFiltersAutomotiveAirFilter.png?v=1793912396"},{"product_id":"gates-timing-belt-ae92-corolla-4age-4agze-16v","title":"AE92 Gates Timing Belt | 4A-GE \/ 4A-GZE 16V (1987-91 Corolla)","description":"\u003ch2\u003eGates Standard \/ RPM Racing Timing Belts\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eFor 1987–1991 Toyota Corolla AE92 coupe equipped with 4A-GE or 4A-GZE 16V.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eGates timing belts for the listed 1987–1991 Japanese-market Corolla AE92 coupes with 4A-GE or 4A-GZE 16-valve engines and 1988–1991 U.S.-market GT-S coupes with 4A-GE 16V. Both belt types cover the listed factory applications without a year-specific purchase choice.\u003c\/p\u003e\u003cp\u003eStandard uses HSN rubber and fiberglass cords for routine maintenance. RPM Racing uses heat-resistant HNBR rubber, reinforced tooth surfaces, and high-strength cords for performance-oriented use. Each option includes one timing belt.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo belt types:\u003c\/strong\u003e Standard for routine replacement or RPM Racing for performance-oriented builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShared factory fitment:\u003c\/strong\u003e no separate model-year option is needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e113 teeth, 19 mm width, and 9.525 mm tooth pitch\u003c\/strong\u003e in both types.\u003c\/li\u003e\n\u003cli\u003eStandard has fiberglass tensile cords; RPM Racing adds a reinforced tooth jacket and high-strength cords.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Trueno (JDM) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Trueno GT-Z (JDM) \/ 4A-GZE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Levin (JDM) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Levin GT-Z (JDM) \/ 4A-GZE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1989–1991:\u003c\/strong\u003e GT-S (U.S.-Market) \/ 4A-GE 16V.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eFitment Notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoth Standard and RPM Racing fit the listed factory 4A-GE 16V and 4A-GZE 16V applications for the stated U.S. and Japanese markets.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot for factory AE92 SR5 4A-F \/ 4A-FE engines or 20-valve 4A-GE timing systems.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFactory year fitment does not establish compatibility with engine swaps or modified timing arrangements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Engine Timing Belt\u003cbr\u003e\u003cstrong\u003eEngine:\u003c\/strong\u003e 4A-GE 16V \/ 4A-GZE 16V\u003cbr\u003e\u003cstrong\u003eTooth Count:\u003c\/strong\u003e 113\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 19 mm\u003cbr\u003e\u003cstrong\u003eTooth Pitch:\u003c\/strong\u003e 9.525 mm\u003cbr\u003e\u003cstrong\u003ePitch Length:\u003c\/strong\u003e 1,076 mm\u003cbr\u003e\u003cstrong\u003eStandard Construction:\u003c\/strong\u003e HSN rubber with fiberglass tensile cords\u003cbr\u003e\u003cstrong\u003eRPM Racing Construction:\u003c\/strong\u003e HNBR rubber, high-strength tensile cords, reinforced nylon tooth jacket\u003cbr\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Standard — Black; RPM Racing — Blue\u003cbr\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e One timing belt per selection\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWhich Timing Belt Should You Choose?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eStandard — Best for Routine Maintenance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose Standard for regular timing-belt service on any listed factory AE92 16-valve engine. It offers a conventional replacement without the added cost of reinforced racing construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRPM Racing — Best for Performance-Oriented Builds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose RPM Racing for reinforced belt construction when high engine speeds are a priority. It does not increase horsepower or justify extending the normal replacement interval; some performance belts may produce audible whine.\u003c\/p\u003e\u003cp\u003ePrefer HKS? The \u003ca href=\"https:\/\/preserverad.com\/products\/hks-fine-tune-high-performance-timing-belt-4age-4agze-16v-ae86-aw11-ae92\"\u003e\u003cstrong\u003eHKS Fine Tune Timing Belt\u003c\/strong\u003e\u003c\/a\u003e offers another reinforced option for supported applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e Choose Standard for everyday service or RPM Racing for a performance-oriented application. Both types cover the listed factory 16-valve engines.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\u003cp\u003eChoose one \u003cstrong\u003eBelt Type\u003c\/strong\u003e:\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eIncludes (1) Gates Standard timing belt.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRPM Racing\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eIncludes (1) Gates RPM Racing timing belt.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eBoth choices cover the listed factory applications. Tensioner, idler components, water pump, and seals are not included.\u003c\/p\u003e","brand":"Gates","offers":[{"title":"Standard","offer_id":68083474759989,"sku":"1832","price":11.95,"currency_code":"USD","in_stock":true},{"title":"RPM Racing","offer_id":68083474727221,"sku":"1833","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/UnfastenedGatesT176TimingBelt.png?v=1794274372"},{"product_id":"ae92-ngk-spark-plug-sets-4age-1988-1991-corolla","title":"AE92 NGK Spark Plug Sets | 4A-GE (1988-91 Corolla)","description":"\u003ch2\u003eNGK Laser Platinum \/ Iridium IX Spark Plug Sets\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1988–1991 U.S.-market Toyota Corolla GT-S AE92 coupe equipped with the original naturally aspirated 4A-GE engine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eRefresh the ignition on your 1988–1991 U.S.-market Corolla GT-S AE92 coupe with four matching NGK spark plugs. Choose the year range matching your GT-S, then select Laser Platinum or Iridium IX.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoth styles arrive factory pre-gapped—no regapping required for the listed original-engine applications: 1.1 mm for 1988–1989 and 0.8 mm for 1990–1991.\u003c\/strong\u003e Laser Platinum retains platinum firing surfaces on both electrodes; Iridium IX offers a fine-wire iridium center electrode. The application group determines the plug profile, heat range and preset gap—not the choice of electrode material.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete four-plug set:\u003c\/strong\u003e Four matching plugs for one supported four-cylinder engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Platinum:\u003c\/strong\u003e Platinum firing surfaces on the center and ground electrodes resist electrode wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIridium IX:\u003c\/strong\u003e A fine-wire iridium center electrode with a tapered nickel-alloy ground electrode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication-matched factory preset:\u003c\/strong\u003e Both styles use 1.1 mm for 1988–1989 or 0.8 mm for 1990–1991.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistor construction:\u003c\/strong\u003e Suppresses ignition electrical interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe — U.S.-Market GT-S\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e Original naturally aspirated 4A-GE \/ Laser Platinum or Iridium IX.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e Original naturally aspirated 4A-GE \/ Laser Platinum or Iridium IX.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the year range matching your GT-S.\u003c\/strong\u003e The 1988–1989 and 1990–1991 sets use different plug profiles, heat ranges and factory gaps and are not interchangeable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for the supercharged 4A-GZE\u003c\/strong\u003e, SR5 or other non-4A-GE engine applications.\u003c\/li\u003e\n\u003cli\u003eFitment is for U.S.-market GT-S coupes with the original naturally aspirated engine and matching ignition leads. Japanese-market applications, swapped heads, intakes or ignition components are outside this listing's stated fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Resistor Spark Plug Set\u003cbr\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Laser Platinum \/ Iridium IX\u003cbr\u003e\n\u003cstrong\u003eElectrode Design:\u003c\/strong\u003e Platinum center and ground firing surfaces (Laser Platinum); iridium center with nickel-alloy ground (Iridium IX)\u003cbr\u003e\n\u003cstrong\u003eFactory Preset Gap:\u003c\/strong\u003e 1.1 mm, 1988–1989; 0.8 mm, 1990–1991 — both styles within each group\u003cbr\u003e\n\u003cstrong\u003eNGK Heat Range:\u003c\/strong\u003e 5, 1988–1989; 6, 1990–1991\u003cbr\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M14 × 1.25\u003cbr\u003e\n\u003cstrong\u003eReach:\u003c\/strong\u003e 19 mm\u003cbr\u003e\n\u003cstrong\u003eHex Size:\u003c\/strong\u003e 16 mm\u003cbr\u003e\n\u003cstrong\u003eSeat Type:\u003c\/strong\u003e Flat Gasket\u003cbr\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Four matching spark plugs per set\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich Spark Plug Should You Choose?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLaser Platinum — Best for stock restoration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Laser Platinum when maintaining the original platinum plug design matters most. It retains precious-metal firing surfaces on both electrodes in the correct plug family for your selected application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIridium IX — Best for owners who prefer an iridium alternative\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose Iridium IX if you prefer a fine-wire iridium design in the correct application-matched plug. A higher price or iridium center electrode alone does not establish a longer service life or everyday performance advantage over dual platinum in these engines.\u003c\/p\u003e\n\u003cp\u003eFor a 1988–1991 U.S.-market GT-S, the \u003ca href=\"https:\/\/preserverad.com\/products\/denso-spark-plug-set-ae92-4age\"\u003e\u003cstrong\u003eDENSO Spark Plug Sets\u003c\/strong\u003e\u003c\/a\u003e also offer Double Platinum and Iridium TT alternatives. Select the matching 1988–1989 or 1990–1991 configuration on that listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Recommendation:\u003c\/strong\u003e Choose Laser Platinum for the original platinum design, or Iridium IX as a personal preference. Select the year range matching your GT-S before choosing either style.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1. Year Range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1988–1989\u003c\/li\u003e\n\u003cli\u003e1990–1991\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2. Spark Plug Type\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser Platinum\u003c\/li\u003e\n\u003cli\u003eIridium IX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth spark plug types are available for each application group. Every configuration includes \u003cstrong\u003efour matching NGK spark plugs\u003c\/strong\u003e of the selected type.\u003c\/p\u003e","brand":"NGK","offers":[{"title":"1988–1989 \/ Laser Platinum","offer_id":68084149977397,"sku":"1804","price":34.99,"currency_code":"USD","in_stock":true},{"title":"1988–1989 \/ Iridium IX","offer_id":68084150010165,"sku":"1805","price":41.99,"currency_code":"USD","in_stock":true},{"title":"1990–1991 \/ Laser Platinum","offer_id":68132278960437,"sku":"1806","price":39.99,"currency_code":"USD","in_stock":true},{"title":"1990–1991 \/ Iridium IX","offer_id":68132278993205,"sku":"1807","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/1logos_1_2_928695aa-fac2-4d47-9fe1-c527b5df28fb.png?v=1791582688"},{"product_id":"supertech-valve-stem-seal-set-4age-ae86-aw11-ae92","title":"Supertech Valve Stem Seal Set | 4A-GE \/ 4A-GZE (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eSupertech Valve Stem Seal Set\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1983–1987 Toyota Corolla AE86 with 4A-GE, plus 1984–1989 Toyota MR2 AW11 and 1987–1991 Toyota Corolla AE92 coupe with 4A-GE or 4A-GZE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis Supertech valve stem seal set restores oil control at the valve guides in 1983–1987 Toyota Corolla AE86 with 4A-GE, plus 1984–1989 Toyota MR2 AW11 and 1987–1991 Toyota Corolla AE92 coupes with 4A-GE or 4A-GZE. The set includes eight intake valve stem seals and eight exhaust valve stem seals.\u003c\/p\u003e\n\u003cp\u003eThe intake seals use a polyacrylic compound, while the exhaust seals use heat-resistant Viton. The set suits original 16-valve cylinder heads with standard valve stems and factory-size valve guides, including bigport and smallport applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntake-specific polyacrylic seals\u003c\/strong\u003e control oil at the intake valve guides.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViton exhaust seals\u003c\/strong\u003e withstand the hotter exhaust-side operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard-guide fitment\u003c\/strong\u003e matches the original 6 mm valve-stem application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBigport and smallport coverage\u003c\/strong\u003e serves the supported original 4A-GE and 4A-GZE cylinder heads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete-engine coverage\u003c\/strong\u003e supplies both intake and exhaust positions in one purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1983–1987:\u003c\/strong\u003e Japanese-market Corolla Levin \/ Sprinter Trueno with 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e U.S.-market GT-S with 4A-GE \/ Manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1984–1989:\u003c\/strong\u003e Japanese-market naturally aspirated 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-market naturally aspirated 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1986–1989:\u003c\/strong\u003e Japanese-market supercharged 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-market Supercharged with 4A-GZE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Japanese-market Corolla Levin \/ Sprinter Trueno GT and GT-APEX with 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e Japanese-market Corolla Levin \/ Sprinter Trueno GTV with 4A-GE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1991:\u003c\/strong\u003e Japanese-market Corolla Levin \/ Sprinter Trueno GT-Z with 4A-GZE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1991:\u003c\/strong\u003e U.S.-market GT-S coupe with 4A-GE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal 16-valve head and standard-size guides:\u003c\/strong\u003e supports 6 mm valve stems and the factory 11 mm seal-mounting diameter on the guides.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for 20-valve conversions\u003c\/strong\u003e or replacement guides that require smaller seals. Modified cylinder heads require the seal size to match the actual valve stems and guides.\u003c\/li\u003e\n\u003cli\u003eValve stem seals do not repair worn valve guides or other causes of oil consumption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the other sealing components involved in this repair, the \u003ca href=\"https:\/\/preserverad.com\/products\/stone-front-camshaft-seal-pair-4age-4agze-ae86-aw11-ae92\"\u003e\u003cstrong\u003eStone Front Camshaft Oil Seal Pair\u003c\/strong\u003e\u003c\/a\u003e supplies both front camshaft positions. The \u003ca href=\"https:\/\/preserverad.com\/products\/mahle-valve-cover-gasket-set-4age-ae86-aw11-ae92\"\u003e\u003cstrong\u003eMAHLE Original Valve Cover Gasket Set\u003c\/strong\u003e\u003c\/a\u003e suits only the matching early naturally aspirated 4A-GE one-piece center-cover arrangement and excludes 4A-GZE; its year and cover restrictions differ from those of these valve stem seals. Camshaft seals and valve cover gaskets are sold separately.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Supertech\u003cbr\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Valve stem seal set\u003cbr\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 4A-GE \/ 4A-GZE\u003cbr\u003e\n\u003cstrong\u003eCylinder Head:\u003c\/strong\u003e 16-valve, bigport or smallport\u003cbr\u003e\n\u003cstrong\u003eValve Stem Diameter:\u003c\/strong\u003e 6 mm\u003cbr\u003e\n\u003cstrong\u003eGuide Seal-Mounting Diameter:\u003c\/strong\u003e 11 mm\u003cbr\u003e\n\u003cstrong\u003eIntake Seal Material:\u003c\/strong\u003e Polyacrylic\u003cbr\u003e\n\u003cstrong\u003eExhaust Seal Material:\u003c\/strong\u003e Viton\u003cbr\u003e\n\u003cstrong\u003eService Quantity:\u003c\/strong\u003e One complete engine\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(8) Supertech intake valve stem seals.\u003c\/li\u003e\n\u003cli\u003e(8) Supertech exhaust valve stem seals.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Supertech","offers":[{"title":"Default Title","offer_id":68084385808693,"sku":"1838","price":31.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/GridofBrownandBlueValveSeals.png?v=1794432733"},{"product_id":"supertech-valve-stem-seal-set-ae92-corolla-4af-4afe-5a","title":"AE92 Supertech Valve Stem Seal Set | 4A-F \/ 4A-FE \/ 5A-F \/ 5A-FE \/ 5A-FHE (1987-91 Corolla)","description":"\u003ch2\u003eSupertech Valve Stem Seal Set\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1987–1991 Toyota Corolla AE92 coupe equipped with a 4A-F, 4A-FE, 5A-F, 5A-FE or 5A-FHE engine and standard valve guides.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis Supertech valve stem seal set controls oil passing between the valve stems and guides in the \u003cstrong\u003e1987–1991 Toyota Corolla AE92 coupe family\u003c\/strong\u003e with 4A-F, 4A-FE or the supported Japanese-market 5A engines. It supplies the intake and exhaust seals for \u003cstrong\u003eone complete engine\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe intake seals use a \u003cstrong\u003epolyacrylic compound\u003c\/strong\u003e, while the exhaust seals use \u003cstrong\u003eheat-resistant Viton\u003c\/strong\u003e for the hotter exhaust-side operating conditions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition-specific materials:\u003c\/strong\u003e separate intake and exhaust compounds suit their respective operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard-guide fitment:\u003c\/strong\u003e matches the original 6 mm valve-stem application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe — U.S. Market\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e SR5 with 4A-F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1991:\u003c\/strong\u003e SR5 with 4A-FE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla Levin \/ Sprinter Trueno — AE91 Coupe — Japanese Market\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e Levin and Trueno G \/ L with 5A-F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1987–1989:\u003c\/strong\u003e Levin ZI and Trueno XI with 5A-FE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1989–1991:\u003c\/strong\u003e Levin and Trueno G \/ L with 5A-FE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1989–1991:\u003c\/strong\u003e Levin ZS and Trueno XS with 5A-FHE.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor original cylinder heads and standard valve guides.\u003c\/strong\u003e Modified guide dimensions require seals matched to the installed components.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCamshaft seals and valve-cover gaskets are not included and are sold separately.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eValve stem seals do not repair worn valve guides or every cause of oil consumption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor 1988–1991 U.S.-market SR5 coupes with 4A-F or 4A-FE, the separate \u003ca href=\"https:\/\/preserverad.com\/products\/stone-front-camshaft-oil-seal-4ac-4af-4afe-corolla\"\u003e\u003cstrong\u003eStone Front Camshaft Oil Seal\u003c\/strong\u003e\u003c\/a\u003e supplies the single external front camshaft seal used by these engines.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Supertech\u003cbr\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Valve stem seal set\u003cbr\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Intake and exhaust valve guides\u003cbr\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 4A-F \/ 4A-FE \/ 5A-F \/ 5A-FE \/ 5A-FHE\u003cbr\u003e\n\u003cstrong\u003eValve Stem Diameter:\u003c\/strong\u003e 6 mm\u003cbr\u003e\n\u003cstrong\u003eIntake Seal Material:\u003c\/strong\u003e Polyacrylic\u003cbr\u003e\n\u003cstrong\u003eExhaust Seal Material:\u003c\/strong\u003e Viton\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(8) Supertech intake valve stem seals.\u003c\/li\u003e\n\u003cli\u003e(8) Supertech exhaust valve stem seals.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Supertech","offers":[{"title":"Default Title","offer_id":68084391182645,"sku":"1839","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/GridofBrownandBlueValveSeals.png?v=1794432733"},{"product_id":"cometic-mls-head-gasket-4age-4agze-16v-ae86-aw11-ae92","title":"Cometic MLS Cylinder Head Gasket | 4A-GE \/ 4A-GZE 16V (AE86 Corolla \/ AW11 MR2 \/ AE92 Corolla)","description":"\u003ch2\u003eCometic MLS Cylinder Head Gasket — 4A-GE \/ 4A-GZE 16-Valve\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1985–1989 Toyota MR2 AW11, 1985–1987 Toyota Corolla AE86 GT-S and 1988 Toyota Corolla AE92 GT-S coupe with the 16-valve 4A-GE or 4A-GZE and an 81 mm bore.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Cometic multi-layer steel (MLS) head gasket seals the 16-valve 4A-GE and supercharged 4A-GZE in 1985–1989 MR2 AW11, 1985–1987 Corolla AE86 GT-S and 1988 Corolla AE92 GT-S with the factory 81 mm bore. Compared with the stock-style composite gasket, it \u003cstrong\u003ehandles more compression, boost and heat\u003c\/strong\u003e, and seven thicknesses let you set compression for your build. The trade-off: it is \u003cstrong\u003eless forgiving\u003c\/strong\u003e and needs \u003cstrong\u003every smooth, flat head and block surfaces\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-layer stainless steel (MLS) construction\u003c\/strong\u003e holds higher cylinder pressure than a composite gasket for high-compression and boosted builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbossed spring-steel layers\u003c\/strong\u003e hold clamp load with less bore distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViton-coated outer layers\u003c\/strong\u003e seal oil and coolant passages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeven compressed thicknesses\u003c\/strong\u003e from 0.027 in. to 0.056 in., where the stock gasket comes in one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e81 mm round bore\u003c\/strong\u003e for the factory 4A-GE \/ 4A-GZE bore size.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuits naturally aspirated and supercharged 16-valve builds.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eChoosing a Thickness\u003c\/h2\u003e\n\u003cp\u003eFor reference, the stock composite gasket is about \u003cstrong\u003e1.2 mm\u003c\/strong\u003e compressed and the popular TRD metal gasket is \u003cstrong\u003e0.8 mm\u003c\/strong\u003e. Thinner raises compression; thicker lowers it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.027 in. \/ 0.69 mm:\u003c\/strong\u003e Thinner than TRD. Highest compression in the range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.030 in. \/ 0.76 mm:\u003c\/strong\u003e Close to the 0.8 mm TRD gasket, a common choice for more compression on naturally aspirated builds. Not an exact TRD equivalent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.036 in. \/ 0.91 mm:\u003c\/strong\u003e Between TRD and stock. Mild compression increase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.040 in. \/ 1.02 mm:\u003c\/strong\u003e A common rebuild thickness. Slightly thinner than stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.045 in. \/ 1.14 mm:\u003c\/strong\u003e Closest to stock thickness, just under 1.2 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.051 in. \/ 1.30 mm:\u003c\/strong\u003e Slightly thicker than stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.056 in. \/ 1.42 mm:\u003c\/strong\u003e Thickest. Lowest compression in the range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChoose by measured deck height, head and block machining, piston design, clearances and target compression, not by model year.\u003c\/strong\u003e A thicker gasket is not automatically better for boost.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eToyota MR2 — AW11 \/ MK1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1989:\u003c\/strong\u003e U.S.-Market \/ 4A-GE 16-valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988–1989:\u003c\/strong\u003e U.S.-Market Supercharged \/ 4A-GZE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE86\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1985–1987:\u003c\/strong\u003e U.S.-Market GT-S \/ 4A-GE 16-valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToyota Corolla — AE92 Coupe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1988:\u003c\/strong\u003e U.S.-Market GT-S \/ 4A-GE 16-valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-valve 4A-GE and 4A-GZE only.\u003c\/strong\u003e The 20-valve 4A-GE, 4A-C, 4A-F and 4A-FE are not covered.\u003c\/li\u003e\n\u003cli\u003eFor an 81 mm bore. Overbored blocks require a larger-bore gasket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequires head and block deck surfaces that are flat, clean and finished to 50 Ra or finer.\u003c\/strong\u003e Visible or fingernail-catchable machining marks are too rough.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess forgiving than a composite gasket:\u003c\/strong\u003e worn, pitted, rough or warped surfaces can weep coolant or leak, and often need resurfacing first.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot for O-ring or receiver-groove setups.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-time use.\u003c\/strong\u003e Not reusable once the engine has run.\u003c\/li\u003e\n\u003cli\u003e1989–1991 U.S.-Market AE92 GT-S and Japanese-market Levin, Trueno, Sprinter and MR2 applications are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Cometic\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Multi-layer stainless steel (MLS)\u003cbr\u003e\u003cstrong\u003eLayers:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eCoating:\u003c\/strong\u003e Viton on outer layers\u003cbr\u003e\u003cstrong\u003eBore Shape:\u003c\/strong\u003e Round\u003cbr\u003e\u003cstrong\u003eBore Size:\u003c\/strong\u003e 81 mm\u003cbr\u003e\u003cstrong\u003eCompressed Thickness:\u003c\/strong\u003e 0.027, 0.030, 0.036, 0.040, 0.045, 0.051 or 0.056 in.\u003cbr\u003e\u003cstrong\u003eRequired Surface Finish:\u003c\/strong\u003e 50 Ra or finer\u003cbr\u003e\u003cstrong\u003eEngine:\u003c\/strong\u003e Toyota 4A-GE \/ 4A-GZE 16-valve\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cp\u003eChoose the compressed thickness for your build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompressed Thickness\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e0.027 in.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e0.030 in.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e0.036 in.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e0.040 in.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e0.045 in.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e0.051 in.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e0.056 in.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach option includes (1) cylinder head gasket.\u003c\/p\u003e\n","brand":"Cometic","offers":[{"title":"0.027 in.","offer_id":68189113286965,"sku":"1954","price":96.52,"currency_code":"USD","in_stock":true},{"title":"0.030 in.","offer_id":68194559394101,"sku":"1955","price":96.52,"currency_code":"USD","in_stock":true},{"title":"0.036 in.","offer_id":68189113319733,"sku":"1956","price":96.52,"currency_code":"USD","in_stock":true},{"title":"0.040 in.","offer_id":68189113352501,"sku":"1957","price":96.52,"currency_code":"USD","in_stock":true},{"title":"0.045 in.","offer_id":68189113385269,"sku":"1958","price":96.52,"currency_code":"USD","in_stock":true},{"title":"0.051 in.","offer_id":68189113418037,"sku":"1959","price":96.52,"currency_code":"USD","in_stock":true},{"title":"0.056 in.","offer_id":68189113450805,"sku":"1960","price":123.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0726\/6005\/8421\/files\/ImmaculateInline-FourEngineHeadGasket.png?v=1794454031"}],"url":"https:\/\/preserverad.com\/collections\/ae92-corolla-engine-parts-1988-1991.oembed","provider":"Preserve Rad","version":"1.0","type":"link"}